You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
Rowdy I wouldn't think 1 inch in tire size would bother the tracks much keepthe air pressure down mount up the tracks spin them freely while up off the ground check ur slack and air up...
Jim what thru me off at first about the motor mount is all the six carriage head bolts were mounted nut inside under the motor so it did not appear adjustable and wouldn't be with the motor in place...
Hey Don thanks so much for the leg up on a belt I couldn't get back to you as some glitch kept me from signing in a big thanks to Argo Jim as he sorted out what was wrong damn digital world again...
I put on 2 new tires today and started servicing it. I greased every zerk I could find but I could only find them on the outside bearings. No zerks inside the tub. I had to pull the carb off and...
So I received the manual with the Argo. It?s a 1987 model with the 18hp Kohler engine. It only has 192.5 hours on it! A mouse has gotten in it and chewed a few wires though, so I?m going to have to...
Rowdy I wouldn't think 1 inch in tire size would...
Rowdy I wouldn't think 1 inch in tire size would bother the tracks much keepthe air pressure down mount up the tracks spin them freely while up off the ground check ur slack and air up...
North Country Tough 04-24-2024, 09:19 PM