Search:

So the motor is probably not hurt I'm assuming. It looked like one of the old war videos of tanks burning oil for a smoke screen haha!

22hp predator. I had the machine in a 45 degree angle while going through a ravine and the low oil switch shut it down. Rolled back and started it on less of an angle and it smoked like it was...

would changing the flyweights make the belt clamp the belt higher on the pulley?

I recently done a swap from my baker hill 6000 to the 7000. The 6000 moved faster than the 7000. Noticed that the same belt doesn't get as deep on the 7000 secondary.

Can I swap my secondary?
...

Upgraded to baker hill 7000 with reverse! So excited to back Up! Also rear winch is finished. Coolest toy ever!

Baker hill 7000 installed on a baker hill 6000 stand. Works perfectly! I'm so happy to have reverse! Moves at a decent speed backwards too. Driving in reverse is the same as forward. Push sticks to...

What is it like using a 7000 in reverse?
Gearbound and slow?
Can I turn any way i want backing up?

Also where do I find seals and bearing for the baker hill trans?

Sorry for the numerous...

Looking at a baker hill 7000 on eBay. Wondering if it would be an easy swap and put up with my 22hp motor.

Baker hill 6000 is still running but not having reverse is tragic on tight trails or...

thanks! adding a trolling motor and front/ rear winches

thank you also should i reverse my tire direction?

16874
had to some testing
16875
thrown together but ill dress it up some
16877
controls, yes it'll have bilge pumps haha
16876
16878
she runs!!

16872
slotted the new engine plate
16870
big motor needs room
16871
dang motor
16868
with some cutting anything will fit
16873

16863
re done the fuel tank and straps. they where held in with wire before
16864
repaired tub holes with fiber mat and abs goo
16865
painted the frame
16866
i started trying to shine it up...

16858
how she rolled up
16862
started teardown
16861
figured out the 16hp was no good so i figured this 22hp would do.
16859
stripped down and lined up some new chains and made new inner...

nick the tires on your machine in the signature are facing the opposite of how mine are. what does this effect?

pics will be uploaded after work today.

2 months ago i acquired my dad's 6x6. It was untouched for over 25 years uncovered in the yard. Back story is that it used to be all amphicat but it would break axles all the time so one day he...

made billet bearing retainers for inners. outers fit perfect. straightened all the axles, frame is reinforced, new pucks from Richards relics arrived, new 21x11-8 rawhide tires showed up too. been...

hahaha, balls of steel you have. what rpm does it float at??

looking to set the governor to 4900-5000 rpm on the 22hp predator. on the single cylinder motors the go kart fellas just shorten the spring. would that work on the v twin?

the lights on my machine pop into the body. i think they are a PAR36 light.