Search:

I broke a chain on (the left drive chain for the wheels)this Sunday on my Max II. So can you just repair a chain or do you have to replace it?

I have a 2000# Harbor freight $39.99 special. I could use a little Umph! more if i was to do it again. I mounted it right to the upper tub using +/- 48" long uni-strut inside the tub to spread out...

I looking for someone who would be interested in rebuilding my T20 near Maryland. i have the parts but no time.

So i have a problem with my 1970's MAX II T-20.
It worked great up until Christmas and then all of a sudden the handles didn't center correctly. you could still go forward if you pushed really far...

So I rebuilt my 1970 Max II last winter and have used it all year.
I have found steep hills it will not go up, ditches it won't cross and have center posted it on logs and stumps I have gotten it...

I sell bolts for a living. Bolts range in strength.
Yes you could put a grade 8 (US) Grade 10 metric bolt in every hole but ask yourself first " if the bolt didn't break what would have broken?"...

There are are two spring holes on the Govenor arm I think that moving the spring from one to the other varies the idle speed from 1300rpm to 1500 rpm. There are other adjustments for a generator....

I have used both Kreem & Caswell and I much prefer Caswell. It is like liquid plastic. Depending on the temp. it is somewhere between Water & Honey. You may be able to tape the hole and then use the...

Laying a motor on it side can bring on a host of problems.
I would suggest using a "right angle gearbox" below the engine to provide a side drive. check ebay for key words "Hub City", "Boston...

The key to loosen up the plungers is penetrating oil and patience. It is easier to pull the plungers out than push them in!
Take a short piece of tubing like 1" electrical conduit and a few large...

I have some 440 JLO parts for sale if you need them. Carb, intake, starter, exhaust manifold, other stuff. No coils or points

443-910-5392

First of all you really can fix anything but it is all more expensive than you might think.
-Good tires ($60/each for new tires)
-The hull should be solid.
-Check the oil & air filter (oil is...

I hate to mail order something like tape but I don't know if it is available at an auto parts store or hardware store.
Is there something you like better than foam tape? The last time I was around...

Hey Sal
I was almost coming to Avalon NJ this weekend but the weather looks like crap so I'm staying home.
Where are you located? I know a good trail that used to be the old railroad grade...

I am in the same exact place in my project. My 18hp vanguard runs from the pull start but i haven't wired the red(AC power, hot from alternator) black (kill switch) to anything. I wish I could be of...

So the 18hp Vanguard runs great. Now I have to wire it. Not my strong suit.

Right now all I have wired is a DC hot from the battery thought the key switch to the starter soleniod. turn the key to...

So a lesson to all! driving on on a flatbed trailer has risks. From this point on I will be winching the max up the ramps. I had taken the Max off of the trailer using the boat-style hand winch.
...

This is on Google books, luckly most of the manual is viewable. Google posts a preview of a number of books in hopes that you will purchase the book. You can't print it or anything but it comes in...

Ok so I've gotten the Max II project out for a test ride this last weekend and it ran great. I had never seen this thing run so i wanted to get it to that stage before I did much to the running gear....

I'm sure that I missed a few things on the transmission chains & axles. I'm going to start a thread over in Transmissions with a few questions.

As for Vandy best of luck with the Hustler, just...