18 Hp vanguard no governor , need a throttle setup
Welcome to 6x6 World.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
18 Hp vanguard no governor , need a throttle setup
Hi Guys ,
I have a 18 Hp vanguard that came out of a Stanley hyd power PAC .
It has a electronic governor that limits it to 3200 rpm .
If I remove it it will not have any governor whatsoever.
I plan to put a rev kit but also don't plan on running over 4200rpm .
I need a throttle control that doesn't need the mech governor to pull on.
I just want to use a common throttle cable and I'll figure out a high idle stop but just have no way to mount a cable to the carb unless I fab something up.
I 'd prefer to use the stock 4 bolts holes for a control linkage.
Reply With Quote
