Forum: Transmissions

My max iv has 177 hr's on it I've changed the fluid in my t20 on the drain plug it has some grayish sludge looks like bans material and some metal...

Help. My 2000 max iv trans shift bars that connect to shifert diamonds are they supposed to be kinda bowed out or straight cause mine are like on a...

My Bigfoot seems to be slowing down in this cold. I changed the transmission fluid because it was white and the constancy of Elmer's glue. It helped...

my bigfoot has about 350 hrs on it and iam startin to here a "new" whine from my transmission. took the belt off and gave the clutch a spin, sounds...

Just new to the site so I am not sure if I am doing this right. I recently purchased a 2007 Avenger and I am slowly going through it and noticed...

Hi all, I am currently doing a full resto on a 69-70 208 that I bought last fall. I have the machine completely stripped down, frame out and powder...

I have had the max out twice now and have had the snap ring on the output shaft on right side of T20 come off, now when I sent for the rebuild kit it...

Recently I was reading some postings ,and also looking at some of the pics posted on 6x6 world, and saw a picture of some one, who has an older Max...

Got the job done yesterday and out for a short test ride out with the broken in with the new 3.3,for our purposes this is the ticket for a...

Just starting a search for a 36mm or 1 7/16" 4 stroke primary clutch. Can anyone tell me if such a thing exists? I would like to put a 25 hp Kohler...

I'm looking into using a Generac engine in a custom Attex I want to build from the ground up. The Generac is very similar to a Kohler, Briggs, etc....

Looking for somewhere/someone that has 4 stroke clutches. Tried finding the comets and thats impossible. Is there another brand of clutch that...

I am putting a 16hp single cylinder engine in and was wondering about clutch engagement. I have found a couple of clutches that are available but...

I just got myself a new clutch for the T-20 in my springer/racer. I needed a 4-stroke clutch and figured a new one would be better than trying to...

The stock clutch in my Max IV (18HP Briggs) needs rebuilt or replaced. Some of the rollers inside do not roll anymore. It looks like some machine...

Does any one out there have two 530 O ring half links? I need them to get my chains back on my t-20 with a 12 tooth sproket. If I can't find some 1/2...

Has anyone ever changed the sprockets on a t20 to 60 chain sprockets? A friend and I are changing his whole MAX II machine over to 60 chain on...

I have a super swamp fox that i just replace the briggs engine with a 1000 cc geo metro fuel injected unit it runs and drives well but keeps...