Forum: Transmissions

I am looking to see how to reverse the clutch assy on my max 4. I intend on doing some mods soon and having the clutch assembled backwards would...

when I run themotor with the cluch on ..no belt and it sticks in the closed posision after shuting down the motor or must it have a belt to work...

Hi. I did some searches regarding the plunger bolts but I need clarification. Its my understanding the plunger bolts should be the same distance...

At the shop right now, trying to get the last part of the primary clutch off. Machine is a 1988 Magnum V888-23 I/C 8x8. Has original Magnum 18 and...

Here's one for the Attex Gurus! a clutch for a 14 horse vanguard and the secondary clutch for a baker~hill 7000! the one on the trans. uses a 1in....

if anybody has an early 70's Sidewinder will you contact me. I need to look at a picture of how the transmission is shifted. It's got the apex...

I have noticed when my machine (new Max IV) is pulling hard, the belt tends to slip. The engine doesn't seem to be bogging down more than I would...

Hi. We're removing the transmission today to replace the secondary clutch center bolt, which broke and left the threaded stud stuck in the shaft....

Hi. We just discovered the center bolt to the secondary clutch broke, leaving the treaded stud stuck in the shaft of the T-20. I do know both the...

Good time of the day! Can you please help me. Does anyone know what size should be break points on the scrambler. It's just I am leaving in Germany...

Hello, the max 2 hasn't had a tranny in a while,I installed one tonight, I got everything back together except for the trans clutch, I installed a...

I need a drive clutch for an argo Kawasaki v-twin. Would a snowmobile clutch work or do I have to buy from argo. if it would work is there anything...

Hey does anyone know what size bolt holds the torque converter on the T20 transmission? THANKS,Dave G.:hmmmm2:

can anyone tell me what the material between the clutch plates is on a early 70's sidewinder. looks like leather

I have a sidewinder with the L340 jlo and it has the apex gear tranmission. any info on the gearbox would be helpfull

Can anyone tell me where to get the bands for the T20 Trans? THANKS,Dave G.:D

How in the heck do you remove the clutch from the engine??? I removed the nut in the front and it looks like there is a threaded stud all down the...

I think that I am going to try to rebuild my t20 next spring! I would like to do the popsicle upgrade.my question is where do you find the rings to...

I have a question about T20’s. Are there two different designs of the shafts that go into each housing? The short one that does not have the...