Forum: Transmissions

If my T-20 didn't have ay thrust washers when I dis-assembled it and I ordered a seal kit from RI with them in it, can I install the thrust washers...

i am about to change my transmission fluid in my 08 frontier 6x6 and i have been to 2 different parts stores looking for this and i can't find it....

I was wondering something. I just bought the red clutch spring and new teflon sliders for the clutch on the T-20. Is there anything I should do...

LarryW just posted a new article on disassembly and reassembly of the Attex 7000 series transmission. It can be found in the articles section or by...

950 husler-t-20 strans-18hp kolher-22x12.5x8 swompers any time I am going up hill , heavy mud, up loading ramps, ect; the motor is really pulled...

I just put up a new article on how to rebuild the Borg Warner / Skid Steer T20 transmission. It is very comprehensive. It is 10 pages long and...

As I'd mentioned before, I bought an 85' hustler that was in fair shape ,except for the transmission. I recieved the transmission in two milk crates...

Still waiting for my Red Spring to show up. Looking in the tub at the lower T-20 clutch, there is not much room between it and the tub. Will I...

Does anyone know what warning signs there might be when the bands start getting low on a T-20. I just wanted to know so I dont ever wear a drum down...

Picked up a quart of Valvoline synthetic ATF instead of dextron III by mistake. Are there any problems with using this in the t-20 or should I bring...

I have an Amphicat Borg Waner tranny and frame that I pulled from an Amphicat. It has no engine on the frame but if I turn the driven pully while...

Hi, I have a Max 1V with astock T-20 transmission. I saw a Max 1V for sale on ebay and in the description it said that this machine had been built...

I was thinking of putting a 4 stroke in the Terra Tiger. Does anybody know where to get a new or used clutch for a low price?

What is the correct way to mount the U channels to the t20 transmission, as well as the correct adjustments for the rod, i have to make them. and...

If you have a control stick that is sticky or hard to move it is probably the caliper. Unhook the controls near the caliper and try to move it by...

Hello I have a 16hp briggs and I think I have a primary clutch problem and I,m not sure how to fix it. Most of the clutch movement appears smooth...

there are two bolts on each side that the rocky thing connects to thats attached to the shift lever. around these bolts is a piece of uchannel...

Does any one out there have two 530 O ring half links? I need them to get my chains back on my t-20 with a 12 tooth sproket. If I can't find some 1/2...