seats and seat belts

Hey everyone, I was wondering what you all do for seats and seat belts during your restorations. I have 4 children(4 y.o. and under)and would like to take them for rides on my Argo. It is a mid 70's Argo 6x6(I'm waiting for Argo to confirm exact year). The bench seat needs to be redone, so I was thinking of a seat with a side bolster to help keep us from sliding around the machine so much. I would love to utilize all 4 seat spots but if I have to I can deal with only 2 seats. I thought about Jegs racing seats but I'm afraid I might not be able to reach the controls. I've already read through the seat restoration how-to and the original thread. Any input would be helpful thanks.

If you don't have a roll bar, it's better to not have seat belts. If you have a roll bar or cage, then seat belts are preferred.

In your case, the purpose is a little different. You are trying to keep young children from getting thrown out. It's a bit of a trade off in restraint vs rollover protection. Since your children are so young, I doubt you are going to be doing any on-the-edge style riding and in that case I wouldn't see the belts being a big deal without a roll bar or cage. You can bolt seat belts to the frame or to the body. If you choose to use the body, large fender washers will help distribute the load without ripping the HDPE. Cheap car seat belts would work fine and probably allow you enough room to bolt them down to the frame.

Quote:

---

Originally Posted by Mike

If you don't have a roll bar, it's better to not have seat belts. If you have a roll bar or cage, then seat belts are preferred.

In your case, the purpose is a little different. You are trying to keep young children from getting thrown out. It's a bit of a trade off in restraint vs rollover protection. Since your children are so young, I doubt you are going to be doing any on-the-edge style riding and in that case I wouldn't see the belts being a big deal without a roll bar or cage. You can bolt seat belts to the frame or to the body. If you choose to use the body, large fender washers will help distribute the load without ripping the HDPE. Cheap car seat belts would work fine and probably allow you enough room to bolt them down to the frame.

---

Thanks Mike, my big worry is that the brakes are very jerky and the kids slide around the machine. In a few weeks I will be bending up a roll cage. Doesn't your Max have a race seat in it? how do you like it?

Quote:

---

Originally Posted by blazin674

Thanks Mike, my big worry is that the brakes are very jerky and the kids slide around the machine. In a few weeks I will be bending up a roll cage. Doesn't your Max have a race seat in it? how do you like it?

---

My Max IV does have a race seat in it and I love it. It's on a suspension pedestal so it helps absorb the bumps in the trail. This thread details my Max IV and shows how I mounted the seat and my seat belts: http://www.6x6world.com/forums/max-a...ne-max-iv.html

Quote:

---

Originally Posted by Mike

My Max IV does have a race seat in it and I love it. It's on a suspension pedestal so it helps absorb the bumps in the trail. This thread details my Max IV and shows how I mounted the seat and my seat belts: http://www.6x6world.com/forums/max-a...ne-max-iv.html

---

Where did you find the suspension pedestal? That is a sweet setup, my back is sore from our trip out yesterday. That would make it feel 100 times better on the trail.

Quote:

---

Originally Posted by blazin674

Where did you find the suspension pedestal? That is a sweet setup, my back is sore from our trip out yesterday. That would make it feel 100 times better on the trail.

---

I think I got mine off of eBay. I believe it was for a zero turn mower.

Quote:

---

Originally Posted by Mike

I think I got mine off of eBay. I believe it was for a zero turn mower.

---

Cool I'll check it out. Thanks again Mike!