Search:

Does anybody know the maximum load for towing is?

I'd check the fuel filter too.

Spray the starting fluid directly into the cylinder, if it starts briefly, your carb is messed up.

Remove the gas tank filler cap, does that solve your problem?

I purchased two from Bass proshop, but I suppose any boating store will carry them.

I've run into scams like this before on Craigs list, never send cash through Western Union. What i've learned is, if you ask very detailed questions, like engine type and size, ask for year and...

I would think you could go to Gears, ODG Gearboxes, ODG Quiet Gears, ODG Custom Transmissions, KTR Couplings, or call 519-662-2840 to find the nearest location. Or contact your local John Deer...

How'd you make out with this, are you still in need of help? I'm not sure I understand. No spark at the spark plug, or no spark comming from the coil? I would replace the plug, if your problem still...

Hey, what was the solution? Starter or coils? If Neither, I would guess your timing was off.

I don't have a tach, and I dont like doing it by ear. So I found this method, unfortunately my multi meter dosn't do Hz. I would be interested to know if this really works, anyone want to give it a...

I have a Conquest and It's amazing what they can do. I think you'll be happy with the end product. I live in a area where people have been know to sink in the mud, (Quick sand) never to be seen...

Great thread so far. It's really come along, I'm sure it's costing you too. I'm sure your engine will start, it seems to me they beat the crap out of the unit, but it wasnt the engine that stopped...

I'm Here too, Raynham, Conquest 8x8. I border the Dead and Hockmock swamps. No too much riding in the dead, maybe way over by 104, I think there is a sand pit, but at my end, just a lot of swamp and...

Thanks for your thoughts, I was looking at some general automotive sights, schedule 40 pipe is said to be strong enough. Maybe I'll use that. Thanks again. If anybody has any good ideas, I'm...

I read somehwere here, about a work around in the case of a failed FD620D starter. Can someone provide more details and perhaps some pictures to illustrate the idea ? :hmmmm2:

I want to put a Roll Bar on. I don't want a whole cage. I was thinking one pipe, about mid machine, between front and back seats, just something to prevent the machine from crushing me if it ever...

The seat has back support and is easily removable. The red arrows are the pin locations holding the unit in.

I purchased, 3/16 steel riviets, with a steel mandrel, with a grip range of .625 -.750. I purchased 3/16 stainless rivet backer plates (Washers). Online from McMaster-CARR. I paid $16.00 for 100...

I've done some measuring and research. My educated guess is 5/16th, or .3125

FYI, Don't touch the screw to the LEFT of the mixture adjustment screw.