You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
Trying to wind up this Max IV project up. This should just about do it, just some little things left.
I used some hardwood strips with a piece of angle iron on each end to keep the sag out of the cover.
The top is 18oz vinyl coated polyester, like the over the road trailers use.
installed grommets around the bottom and ran a 1/4" nylon rope through them, the picture is with a 1/8" rope. I used 2 clothes lien tensioners hooked back to back to hold the rope tight.
Thanks again. I think the real test will be the 3000 mile road trip north. I'm thinking of running some straps under the Max and fasten them to the rope to keep it real tight for the trip.