I finally got the clutch off the shaft after I took the transmission off. Can anyone tell me if this is a salsbury 780 driven clutch from the pic? There are no numbers on it. the ramp is stamped...
Type: Posts; User: Dino
I finally got the clutch off the shaft after I took the transmission off. Can anyone tell me if this is a salsbury 780 driven clutch from the pic? There are no numbers on it. the ramp is stamped...
I'm in the lehigh valley, Pa. If anyone knows of a local mechanic that works on 6 wheelers please let me know.
Thank you!
Is there any online sites that I can research to see what pair would work best with my setup? Or does anyone have any recommendations. I'm not looking to go too fast. 25 would be fast enough I...
I believe the secondary is stuck open. It appear the primary is trying shut (shuts about a 1/4 inch) but I think the secondary is stopping it from opening. I could be wrong. Anyway the secondary...
14673146741467514676
Thanks for the info but unfortunately I have no idea. Shoot I'd be happy if it went 20-25. It seems like there are so many options for clutches,weights, green, pink, black and who knows what...
I am pretty sure it is the secondary. I am thinking I should be able to twist and push it together at least a little. But I can't get it to budge at all. I sprayed it up and but it just will not...
You read my mind. I was pondering this on my way to work this morning. My plan is to take the primary and belt off and check the secondary to see if I can work it closed. If that closes up ok, I'll...
That is it. The primary clutch is only closing about a half inch at most. after looking at it more carefully the secondary clutch isn't really moving either. I believe the secondary clutch is...
I see the clutch (attached to the t20 with the spring) closing as I give it more gas while driving. however I don't see any difference in the chain speed coming off the t20? I think I need to...
That worked! Thank you! Both levers work forward and back. I still can't figure out why speed is maxed out at around 7 mph. I say 7 because I am just a bit faster than my son's 5 mph ride on. ...
Thanks for the info! I read up on adjusting the bands and received some info regarding the plungers. I noticed the top/bottom plunger on the right side were sticking out about 1/2 inch and they...
One more thing - the RPM's are getting up. In other words at full throttle and the rpm's up it is still only going about 7 mph. Belt is relatively new and has the typicaly 1" to 1 1/2" deflection...
I have a hustler 950 with a 20 hp Briggs engine and t20 trans. Top speed is about 7 mph. Belt is fine, chains are tight, spark plugs are new. It seems to be choppy turning as well. It also seems...
thank you! I will take a look at that.
First time owning a 6 wheeler. Any feedback to any of the issues I am having would be greatly appreciated. Previous owner installed a 20 hp Briggs and stratton I/c turbo cool engine . I am not...
Hi! I just purchased a Hustler 2 weeks ago. I live in Eastern Pennsylvania. I have 3 young boys and we love the outdoors and I am hoping this will be a fun toy for us to enjoy together (riding and...