Search:

Excellent. Thanks.

Is the input shaft diameter on the T-20 7/8" diameter? Tried to measure, but don't have my calipers and the transmission in the same town right now.

One more question:

On the inner bearings that go along the inner frame at the sprocket end of the axles, my Hustler had cast iron flanges when I bought it. They were bolted in with a bunch of...

206 for both inner and outer bearings? Everything I see on the 206s shows to be 1 3/16" whereas the 205s are 1". The inner bearings, (The ones along the inner frame rail at the sprocket end) should...

I need to order all new bearings for my Hustler. I have the part numbers for the inserts, but need the bearing flanges as well. Had to replace them all due to rust, other disassembly damage. Does...

Awesome. Thanks again.

The gear puller worked like a charm, so I was able to save the last axle. Wish I'd seen that tool before I cut the first one.

Just wanted to post an update here. Out of frustration, I cut one of my axles with a stuck sprocket, then pressed the axle out of the sprocket. I was going to cut the other one, but in the meantime I...

Sorry for the delay, with the big cold spell that came through last weekend, I didn't get to go to the workshop and work on the Hustler. (It's about an hour and a half drive away from me, so I only...

Has anyone put bucket seats of one sort or another in their Hustler? I was looking at the seat on mine over the weekend when I moved the upper plastic out of the way while I'm working on the axles...

Just a quick update, I may only need one axle. I was in Harbor Freight for their big sale with the 25% off coupon yesterday and saw this little guy sitting on the shelf:

5 Ton Three Jaw Hydraulic...

Dirtdobber, that would be awesome. I'm in no rush. This time of year the good weather doesn't line up with the weekends too often anyway.

Wow. Worst I've ever had was a small roach try to crawl into my ear one night. Felt it, woke up, slapped my ear and squashed it. The smell made me start gagging. So I was standing in the shower at...

Sorry bout that. Posted from my phone and didn't see the Wanted forum.

(If ISO ads are against the rules, please delete.)

I need 2 Hustler axles, non-splined. Had two that were seized to the sprockets so bad I had to cut them to save the sprockets. Looking for the...

Well, I have 3 of the 6 axles out. The remaining 3, the sprockets are STUCK. I have also learned just how hard on a body a slide hammer is. Forgot to take my air compressor back to the workshop...

Finally got one of the troublesome rear axle inner bearings removed. Helps if I use metal cutting discs in my angle grinder instead of masonry cutting discs...

Anyway, I got the bearing out, and...

Well, there are locking collars on the outside of the outer bearings. Unfortunately I'm having heck with the rear two axles. Someone welded a flat plate motor mount across the original motor mounts...

I intend on flipping the inner bearings correctly. There are locking inside the frame on the inner bearings. Each of the locking collars has one threaded hole for the set screw, and one hole for the...

Just re-watched the video where I could go full screen with it, and my Hustler definitely does not have locking collars on the outer bearings. Are they necessary?