You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
Was able to press one sprocket off an axle, not so lucky on the other, bent the sprocket over. Tried again and broke the weld holding the sprocket on the tube. IMG_5588.jpg
Will cut it off to save what's left of the axle.
Due to financials, I will probably end up just tig welding the axles back together, and ordering new sprockets and sprocket tubes.
Tractor supply had the 22 tooth #50 sprockets I needed. Only issue is their ID is 2", and the sprocket tube OD is 1 5/8". Took it to a machine shop and am having them cut me 6" of 2"OD, 1 5/8 ID tubing. Will have it back Tuesday and in the machine Thursday.
Fitted the axles back in. Definitely not a capable machine without power to the front wheels. Was doing a 4 wheel burn out trying to drive up a curb
Posting Permissions
Reply With Quote