Forum: Max ATVs

I bought a Buffalo about 8 months ago that had been sitting for several years. Had to replace the fuel pump and fuel line and a few other minor...

I'm new to the 6x6 world and I'm wondering about the Buffalo. Is it any better to use as a work horse so to speak in lieu of a standard 6x6?

Haven't worked on the Max for a while, it's time to finish it up to take to the cabin this summer. I did get new 9" mudd-ox wheels and 25x12x9 argo...

Anyone familiar with the E-Z Shift kit for Max II? My 1998 has always been extremely difficult to shift, no matter what adjustments are made to it...

I need to replace three of my four chain tensioners. I currently have one of the roller style single-bolt tensioners that I installed a couple of...

I have a Max11 with the plastic tank. The PO had cut a hole in the side of the take to move the filler. I JB welded a piece of aluminum over the hole...

Hello, I have a 1989 Max II with a Tecumseh OH 160 in it. I want to upgrade to an 18 hp Vanguard, and was wondering if the engine bolt pattern on...

Hey guys! Working on a 79~ max iv.... Are all of the axles the same dimensions? I need to replace them all.... they are so badly rotted and I’m...

If I buy a brand new 23hp vanguard engine will I be able to use it in the max? Is this a direct bolt on.

I got an Argo a while back and now I’m rebuild a max II and I wanted to know if you take them in the water can you keep them in the water for a...

I have a max 2 and the secondary clutch started making noise about half way open. Should there be any play when you lift on the clutch? It is a small...

Any of y’all have a max 2 axle laying around who wouldn’t mind taking an overall length dimension as well as the location of the sprocket tube...

Developed a loud clunking sound in the left front wheel / axle area. I'm handy at a lot of things, but wheel bearings and such are not one of my...

i resored my max and now are on the finishing touches.i swapped the ol teschuma 16 for a new 16 vanguard ,the v guard has the key mounted on the...

Just picked up a max iv .... it has Carlisle 23x10.50-12, is this a common wheel/tire combo for the older ATVs? The research I’ve been doing is...

I am new to the max II and just restored one. I was wondering what drain plugs I should use?

Redoing all bearings and flanges on my max iv. Anyone try a rubber gasket on the outer flanges? Thinking about rubber gasket with 3m 4200.

Looking to get information on my max II. Looking for a year, correct motor suppose to be in it, where to find parts. Serial number is 6250. Motor is...