Forum: Max ATVs

I live in FL and a friend and i were out at a mud hole today and his max has no power its very sluggish no lowend at all tires wont even turn in mud...

I have a max II, having some issues with torque going up hills wondering if my belt the wrong size or the clutch springs worn out is there a way to...

hi i was woundering were you could find the plastic upper bodies for the max 2:hmmmm2:

I am stuck again with a perplexing issue. In one of the rear axels below the output for the T-20 spocket is an idler spocket for chain adjustment...

Getting ready to mount a bilge pump in my max 2 and was just wondering if anybody helpful hits maybe what size or where to run the discharge hose....

hi what is the adress for recreative indurstries:hmmmm2:

Curious if anyone has tried the spring loaded shifter rods that Richard is advertising. I plow snow and shifting between forward and reverse, seems...

Hello all, thanks for this forum, great info I've finally found a max IV with tracks and have to drive 5-6 hrs to get it and I'd rather not take a...

So I just wanted to let everyone know where to get those body nuts for the Max's. After calling RR and getting the quote of .99 each I decided to...

After taking the lug nuts off is it normal for the rim to be so tight on the studs? It`s nothing like a car rim. These things are tight:hmmmm2: Thanks

I was wondering,,,, I got my new turbo diesel and spare tranny the other day and I am thinking abour turning the motor and tranny 180 degrees...

Do most mid 90 models come with an hour meter? I have found a96 model that a guy wants to sell for $2000, but he says it is a little hard to shift...

Hi there, my sub axle in the rear of the max-ll broke. Now what is the best way to remove what is still in place? I'm having trouble removing the...

I *hate* having a dead battery in this machine, especially when my rear rack is on as it weighs a ton. Also, the winch draws a lot of power. My...

Hi there, Has anyone installed suspension to a Max-II. If so do you have pics? Thanks

The first time I replaced the bearings in my Max II, I took pictures for the how-to article. Now that it was time to do it again, I tried to video...

Have just bought a set of 25" mud bugs and will get started remolding my tub on my max2 tomorrow after work. Hopefully some of u that have already...

So I have been working on my "new" max II for about a month now at night when I have the time... So far I have replaced all the chains, new bearings...