Forum: Max ATVs

Well i just came back from my first trip with my max, all went well untill it started to break the grade 8 bolts that lock the drive gears to the...

Hi, my lever broken, and i change for KAWASAKI Wave runner PART NUMBER 39074-3725. Perfect FIT not need any madification. More Solid, better better...

Anyone else have this problem? mine is a max II with ext muffler. The flex-pipe that goes through tub is surrounded by a stainless steel mesh which...

Any suggestions for adding seatbelts? Where to buy and how to mount?

O.K. I'm looking to replace the short chains coming off of the T-20 with really good quality chains. I've read and read post after post. It seems...

just finished up my max IV restoration and when you drive it it drifts to the right slightly. how do you center the steering. could it be from slight...

I have a 2001 maxII. My neighbor took it for a 5 minute ride out of my sight and tried to cross a log. He called me and told me he didn't know how to...

i bought this for some fun has rockwell 2 stroke 1 piston it goes forward great wants to not track all the way i can feel the gears lock up in...

Broke down this weekend in a really bad place i had two bearing collars on the same axle shatter causing the rear axle to slide out and pop a chain...

I currently have a mid 90s 2 person MAX with a 16hp Vanguard and tracks. Last November the motor was throwing rods, but my father worked on it, and...

I've been wanting one for years, finally got one today. It had been stored in a garage for about two years with about 75 hours of use. It was...

I just finished rebuilding my Max IV but the belt is squealing the belt was purchased in about '97 with the Max. Could the age of the belt have...

I noticed that some people have built wraparound body bands out of angle iron for there Max IV's. I started by building the front and back bumpers....

If a MAX is jacked up in the air so the wheels are off the ground, I assume that in neutral that both sides should spin freely back and forth by...

I have a Kohler Command 20. I removed the electrical and fuel lines, unbolted the 4 platform mounts. The last item is the drive belt. I tried tilting...

While the motor and back seat are out of the Max IV, I'd like to clean up the some of the pine needles and other crud. The sprockets appear to have a...