Forum: Max ATVs

I just got my max2 home and had to changed out the starter solenoid i used a ford starter solenoid know the left side jack shaft chain broke there is...

Could someone tell me where to find the VIN on a 95 max iv? Is it the same as serial number? Thanks

I've read almost all the postings and haven't found anything close. I'm looking at a 2001 either 16 or 18 horse Max 11. It looked pretty good covered...

ANY ONE KNOW WHERE I CAN GET A EXTERNAL MUFFLER FOR A 1988 MAX II. Suposably they don't stock them any more. thanks, scott

So my Friends dad has a mid 80's 6X6 that he calls a big max. My question is, can anyone tell me much about this particular 6X6. I'm semi familure...

Just got an older max with a good t20 and good bottom the top body is kind of beat up but i took out the original jlo engine and switched it for a...

Ok, so the Max IV I got had the wiring harness unhooked and there are 2 wiring harnesses that have the same connectiong. There is a red and black...

when i put my maxII in reverse only one side turns. both turn in forward:help:

Has anyone been in mud so bad that it snapped a drive chain and clogged up all six wheels so tight that you couldn't move at all? Well it happened to...

I was think of mounting a trolling motor on my maxII any suggestion's on the placement of the bracket or can it mount to the upper plastic on the...

my 1995 MAX II 6X6 has a tranny issue. i was driving it when the left lever sprung forward on it's own and now stays in this position making steering...

Looking for dimensions or part number for drive belt for MaxIV with 16 hp van guard

I am a new first time owner,, I bought a 1988 maxIV 23 kolher ,,I got rid of the 21" tires and bought a new set of 26x12x12 terra's right from RI...

I have an older max2 with the drums on the sprocket of the font axels can you weld a new sprocket on the drum?

ok so my 1996 max iv uses #50 chain the only place i noticed a difference in the chain was from the transmission to the back axle i took the chain...

what does recreatives use to seal up the exit hole where the head pipe runs thru the body it looks like some kind of gasket material am i right ?

Anybody up in Northern Michigan want to be a good samaritan and help this guy out? MAX II 6x6 need shift sleave replaced

I finally got my MaxII fixed this weekend. My throttle cable was siezed and it's been sitting for 2 weeks. I thought I would go on an adventure in a...