Thanks! and yep all fixed- just put on another vacuum style pump. Good point about rolling it and such. Now, about the possibility of rebuilding the pump...
Doesn't look rebuildable to me...its a...
Type: Posts; User: TripleTriple
Thanks! and yep all fixed- just put on another vacuum style pump. Good point about rolling it and such. Now, about the possibility of rebuilding the pump...
Doesn't look rebuildable to me...its a...
I woke up to another 6" of snow this morning. Of course the fuel pump is not pushing any fuel :hmmmm2:.
The fuel line and filter is new and the tank was flushed in October- Its clean.
Sooo I'm...
NO KIDDING!!... stupid rat!!!
Have to jack it up and run one side at a time. I would think that would narrow it down. Then concentrate on the side that is giving you problems. Just guessing here but is it possible That your chain...
I wouldn't mind getting together down in the Sproul or Susquahannok for a ride if possible.... I'm 2 hrs north of Lockhaven. Don't the State forests require a registration? (They do up here) Let me...
Well.. Went forward with the mount... I'll post up pics if it ever stops snowing! I have been using the dickens out of it and it works great. Basically mounted the inner plate to the front of the...
Ok, this is my take on a snow plow for my Max IV. Certainly not done yet- needs the springs, some pins here and there, a wear bar on the bottom edge and some other "stuff" but I need to make a trip...
I just got back from pulling and winching a snowmobile a 1/4 mile out of the woods. I Love the Max because It did it (I only winched twice... without tracks even!):rock: and I Hate it because it was...
I would have to say something is wrong... I am truly impressed with the stopping power on my Max IV when pulling back on the laterals...It STOPS on the hill-I'm actually afraid of doing an endo! The...
Thanks! I still have to tack in some expanded metal, make some sides out of 1/2" square tubing, and some footman loops for tie-downs.
Made this yesterday. Two wingnuts and it folds up against the rollbar so I can get to the engine. One more thing off the list-next will be a top encloser and heater....
The exhaust on the Max IV was whipped and, I always wanted to try to make my own exhaust. I wanted it to be as quiet as possible and still allow "room to grow" in the future. This turned out great....
I'm almost done with an attempt at an exhaust. I'll post some pics if I'm happy with it... It's kinda an experiment ("mad scientist!") 3 chambers- the two out side chambers recieve the exhaust from...
Heli-coil worked! I adjusted the tranny and it feels great. Also went and got another Belt-the other one was too long. this one is a 1/16th wider (1 1/4") and 43.133 inches long with 28 degree sides....
Yeah, heli-coil is my friend. I break a LOT of stuff! I read about the shoulder bolt mod but it appears that that will have to wait untill I have to tear down the T20 so I can get it spot-faced and...
I went out riding on New Years day and once or twice I felt this wierd feeling from the Tranny. Also It wouldn't spin the right side in reverse when I got stuck (twice!) So I pulled the Motor and...
Well... I got a Max IV a couple of weeks ago. I brought it home, blew it apart and cleaned and serviced everything at the suggestion of a lot of guys on this board. Then proceded to mount my winch,...
NOT like a Tracker- they are bolted to the transmission (married) the Samuria is attached to the tranny with a short driveshaft. Wieghs maybe 30-40lbs. High range does have some reduction as well so...
Suzuki Samurai transfer case gets my vote (small, light,bulletproof and a huge aftermarket for gear swaps) Also is self contained- it is divorce mounted and has flanges already mounted for adapting...
http://i1100.photobucket.com/albums/g417/flipstil/th_6x6001.jpg?t=1293452107
During the process I also tied it into the lower tub-used some huge backing plates- doesn't budge!
Started working...