Search:

*Sold*

John, I am located a few hours south of you in Chesterfield which is just south of Richmond. Can you send me a picture of the tires/rims? Also, are these rims similar to a K-lock rim and will they...

That looks pretty slick. The header wrap is a good idea for heat reduction as well. Good job on that and thanks for the pic.

Did the exhaust hook up or did you have to modify it? I am thinking about putting a Predator in my MaxII just for the extra HP.

There is a specific lube designed for CVT clutches. I use a dry teflon lube and lubricate the inside of the sheaves (not where the belt rides up and down, but the shaft that the sheaves ride on) as...

Not sure what is going on with your machine, but keep in mind the driver and the driven clutch on these need periodic maintenance (lubrication). The Dayco HP3003 is the correct belt for my 1995 MaxII...

I have a 1995 Max II now. It has axles that are "through bolted" as opposed to the newer models that have "splined" axles. RI saw that splined axles were superior to the old style and thus made the...

Looks good. My current factory setup has the muffler mounted outside the body. I thought about ways to tie in the factory exhaust to a Predator. I bet 22 hp moves the Max II right along.

I have a 1995 Max II with the 14hp Vanguard. I am thinking about upgrading to the Predator 22hp as well. Post some pics/details/modifications of what you had to do during the swap if you don't mind....

Here are the pictures as promised. I thought I had used a aluminum plate for the backer plate, but it is steel. The section of angle iron under the winch is actually about 24" wide. This is probably...

Here is a picture of the winch mounted from the outside. I will try to get some more detailed pics tomorrow afternoon and post them. The winch is used in this application to raise and lower the...

I made my own winch mount and bolted it directly to the front overlapping edge of the body. I also used a 1/4 aluminum backer plate on the inside and a 14" section of angle iron under the front lip....

10-4. I just wanted to verify it never had an actual parking brake from the factory. I will utilize a tree or something solid if I ever need to park it. Its pretty flat here in eastern Virginia where...

I have a 1995 Max II that I have owned for a few years. It has a brake pedal on the left side of the floorboard, but no way to lock it like a parking brake. I rarely ever use the brake. I was...

The Dayco HP3003 is the correct belt. I have a 1995 Max II with a 14hp Vanguard and I bought the HP3003 for $29.99 with free shipping from a website called sixity.com Highly recommended!

Thanks for all the replies and insight. I rarely ever take my Max in water, but would like for it to swim if I ever need it to. I like the Kenda Bearclaw because it has a great price($69 each!!) and...

I have a MaxII and the tires are almost done. I was looking at options for the 8" rim and came across the Kenda Bearclaw at a decent price. Has anyone ran them and do they swim? They seem to have a...

I just wanted to post this for anyone looking for a Max IV. This is a 2003 for $4275 and only 170 hours on the machine. 20hp Kohler. I saw this ad on the local craigslist and just wanted to pass it...

Great job. I love working with fiberglass. I restore old boats as a hobby and have done quite a few floors and transom replacements. Did you use epoxy or polyester? I prefer epoxy for the structural...

The tires look good. I have a couple questions because I will need tires soon.

Have you tried these tires in water (how well do they swim?)

Did you have to do any modification to get them to...