Search:

HI
The theme of the thread is to build some thing simple ,kid orientated and at a low cost .
Small and very compact is the point .
If u want to go fast u could buy a dirt sprint go cart .Still...

hi
The idea is to keep it simple . Engineers have thought out the combination of
tire size ---affects load and speed
sprocket reduction on both sprocket sets
Aluminum pulley x2 there would be...

hi
Painting plastic ..
Consult paint maker first and notify them of the substrate [base material]
It may well be vast quantities of preparation at least 3 days
Possibly be an additive into the...

hi
the reduction in gearing will need to be well thought out .
Lots of gear reduction will help out every thing but not much speed
The friction belt drive system loose /tight/ loose will not...

hi
crank keyway
camshaft
extra steel pushrods 2
shims for base of valve spring
white valve springs
valve spring retainers
update to late 2nd generation steel rockers
exhaust...

HI
by spraying starter fluid u also check the pump ,assuming the carb is clean & ok

tomo

hi
An Argo specialist will respond .
the particular combination u require may well be specific to argo I donot no.

In general terms
Mean while 780 drive is very common 3/4 ,7/8,...

hi
Way Cool !!!!!:top:
I am sure the kids including the bigger ones will get great entertainment from this micro 6x6 .:laugh::laugh::6x6burnout:

I will have to at least make a chassis now ....

hi
Agree with all others .
The clutches need to be identified . MATCHED PAIR ONLY
[NON MATCHING CLUTCHES CAN BE USED BUT ONLY BY A PERSON WHO CAN SET THEM UP, WITH THE CORRECT BELT ]
A...

HI
The best way to look after a starter is to ensure it has good wiring ,
At least 1/2 inch od
Do both positive and negative side [negative side, starter to battery ]
Voltage drop caused by...

hi
Argo = remove hood in hot weather

tomo

tomo

hi ,
Do not use on taper lock sprockets between the bush and sprocket the surfaces must be clean and damage free.
A taper fit is the same
The surfaces rely on friction.

tomo

hi ,
If u r chasing good allrounder tires in OZ
swim, mud, sand ,hard pack ,easy to skid steer , all with some comfort
4ply 21 11 8
The only v lug [chevron pattern] u will be able to get are
...

hi
Can u not just order an over haul kit
U may have to buy a piston if corroded
or
send caliper to a large brake supplies company . They will charge little to supply and install an ohaul kit ....

hi
triple seal outer and standard 2 lip seal inner

tomo

hi
What is so unusual about these bearings ???
62 mm outer ,curved outer /self locating 1 inch bore
Either eccentric locking ring or grub screw
triple seal -use these for outer bearing or...

hi
If all the linkages are adjusted correctly
Re bleed system
If still not working u have pistons in the caliper that r sticking --overhaul new seal, dust boot etc

tomo

hi
To verify is the triangle shifter popping up or is the transmission jumping out of forward or reverse on that side .
Triangle popping up -u need a retainer plate located between the 2 upper...

hi
I would schedule the T20 to be opened up for inspection .
The band linning/ material will be impregnated with gear oil .
The material on the bands is selected knowing what oil will be used ....