Might as well give a 2 year old update to how everything worked.
The Max has worked fantastic, so much easer on us with no feedback from the steering. We can pretty much go straight down the cutline...
Type: Posts; User: Hideous 4x4
Might as well give a 2 year old update to how everything worked.
The Max has worked fantastic, so much easer on us with no feedback from the steering. We can pretty much go straight down the cutline...
Thanks fisheyes. As I've said before this forum as lots of talented and knowledgeable people. They sure helped me out with some of my problems.
https://www.walmart.com/ip/Beckson-DP10B-Drain-Plug-1In-Black/32921132
I used these when I changed them in my Max IV. Made from delron, not cheap plastic. Ordered online and picked them up at a...
I finally ran the Max in water for the first time, just a small private pond close to the house. The banks were a little steeper than I liked but it was the only water around.
Going in it was up to...
One other thing I did was to sew in a piece off a thermal welding blanket where the exhaust pipe hits the cover to keep from melting the cover.
I have about 20 hrs on the extensions, just removed the tires and wheel yesterday. I did a visual check and checked for any play, they were still tight.
There are some folks on here that have used...
Thanks again. I think the real test will be the 3000 mile road trip north. I'm thinking of running some straps under the Max and fasten them to the rope to keep it real tight for the trip.
I made up extensions for my Max a while back that sounds like what your going to do.
http://i1000.photobucket.com/albums/af127/buckhonda1/Max%20IV/P1010094_zps6paqwfui.jpg
This is the thread on...
Thanks Mike
Very nice! I like the seat belt, just enough to hold your son in. When I take my grand daughter for a ride, with out someone to hold on to her she get thrown around very easily.
Your video reminded...
Trying to wind up this Max IV project up. This should just about do it, just some little things left.
I used some hardwood strips with a piece of angle iron on each end to keep the sag out of the...
Thank guys
Sure getting excited about taking it up to AK and see what it will do!
Dang if I didn't get sidetracked again, rebuilt our 1981 Ski Doo élan. Got the t20 back together and it's like a new machine.
It's so quiet now, no chatter at all. It was either the glazed drums...
We usually have some trees to clear off the trail to the cabin on the first trip in. So a chainsaw is a must, I made this chain guard to hold the little chainsaw. It's 2 pieces of aluminum with a...
Mike, I've have been using the additive every time I changed the oil, last time I used type F with 4oz of Trans-X Posi-Trac with no change. When it chattered mostly when I turned left, I thought...
I've been running the max around every chance I get and everything is working ok except for some noise in the drivetrain. I'm pretty sure it's coming from the t-20 and is band chatter. 98% of the...
Thanks Buick
Wasn't happy with the way the top fit around the sides so I installed some grommets and short bungee cord material and some ss hooks for the tub.
Stays nice and tight now.
...
I made the mistake of remodeling the rec room before I finished the trailer. It turned out to be a bigger job than anticipated! Then just had to make 2 elk antler end tables and a floor lamp, but...
I'm no grease zerk expert; far from it. But I noticed something about their sizing that baffles me. The 1/8"-27 size zerk is about twice as big as the 1/4"-28 size. I wonder why since a quarter is...
Wow 27! I had 12 at one time but down to 1 junker, two tube buggy's and two built sami tin tops for daily drivers. I have most everything to build a rear engine independent suspension buggy. Just to...