Search:

This looks a LOT like my old design from a few years ago (Still in use) I used heavier plate I think 3/8" (likely over kill). And I bolted to all 3 axle flanges. What I did was place a deep nut...

Well, I guess I should clarify. I used the machine over the past week and it was fine. And used it yesterday for about 45 minutes before it started acting up. The gas is fresh. I filled it last...

So I had my Max II out today for a joy ride (Something I have not been able to do for months) I was riding along through some trails and making some of my own. . On my way back I started to notice a...

OK, so I was just out in the Garage, the gentleman before me had these tracks on another machine so I needed to remove some links. Working on that I was envisioning putting these on. So what do you...

JP, so in your opinion. I would be OK without the bearing cages?

I guess I should clarify with "slippage" I actually mean loss of traction. As in I just spin on the ice/snow

OK, so I have a 2003 Max II with an 18 HP Briggs. I have purchased some wheel spacers, and a used set of the RI tracks. I have a homemade snow plow setup on my MAX and got some real use out of it...

So I just wanted to let everyone know where to get those body nuts for the Max's. After calling RR and getting the quote of .99 each I decided to scour Amazon. The one on the left is the stock part...

I have actually been looking at several different ones. A few that look exactly like this! So this is one that some fellow 6x6'ers would recommend?

So I had my first (Major) breakdown today in my Max II. While pushing a large pile of snow (With my homemade plow setup) I was being a little rough with the sticks and suddenly heard and felt a thud...

OK, so I need some help here, I have a new set of rims now. Turns out the 21" runamucks I had are in worse shape than I originally thought. Anyone know of a good cheap tire for running Tracks on...

Come to think of it, I was looking at those wheel extensions from R6x6 but... There 6", NOS attex stuff. Will I NEED 6" Or something shorter?

"Local" argo dealer? :-) Theres one a couple hours away I could perhaps give a ring to. How about the rims? Anyone know if those are suitable?

My bad, they are the 21's Runamucks. These are suitable I presume? Anyone know if the extensions would be cheaper from recreatives or R6x6? Also Do you think these rims would be suitable? I can...

OK, so I am trying to outfit my Max II with tracks. I have a set of the Tru Trax (Like over at r6x6) I also have some 22x11x8 Tires sitting under my workbench out in the garage, to the best of my...

No, it has not been squealing. I did notice yesterday while cruising with my son at about 1/3 throttle that the engine was revving up and down a little. Mixture maybe? And I have at times smelled...

So I think my 2003 Max II doesn't have the grunt it once did. I notice it especially up steep hills. I have a suspicion it's the belt slipping. I have had this for 3 years same belt that came on...

I found what I needed I think (Will try it this weekend) Dorman Part# 610-041
1964-1967 Chevrolet Suburban Wheel Stud - Dorman 610-041 - Front

Looks right, I paid about $1.50 a piece locally.

A buddy of mine mentioned Napa as they often have more selection. I will likely try there after work today. If I do find one I will post up a part # so it someone searching the frums later can...

Alright guys so My 2003 Mqx II (5 stud wheels) is used for plowing snow through the winter. While re-mounting my wheels during the mounting of the snowblade this past winder I snapped a stud (Damn...