I took the clutch plate off and oiled the rods. it seems to work better.
Type: Posts; User: john1edwards
I took the clutch plate off and oiled the rods. it seems to work better.
I got some Tru power tires. They really swim well. And seem to really go good in general.:D:D
I rode a bunch this week and beat on my machine and the epoxy is still holding.
So far that epoxy has been holding up:D I am going to run it over thanks giving. will keep posted
Thanks, I pulled the motor so I could see what was going on, but one side was dry. I greased it with some stp and oil. it works better than ever now. I also cut some of the motor stand plate out...
Thanks I hope I don't have to pull the motor off. not much room under there.
I am stuck in forward gear in my max 4. don't want to force it. what am I looking for .
thanks
John
Thanks for posting the pictures. I just bought and put on some g flex west system epoxy. I will let you know how it works.
I rode it a few times before it broke. some of the weld held. I welded it again. maybe I didn't have it hot enough.
Mike I have boats and use that west system 610 epoxy alot.
I have an 18 hp v twin honda, the muffler seams loud I was wondering if there are different mufflers that are quieter. I used to have an 18 briggs didn't seam so loud. any thoughts.:confused:
Well my plastic weld broke.
Its a max iv running rahide IIIs 25s
http://www.youtube.com/watch?v=ZGPg5S5O_aE
Doe anybody ride in River Ranch Florida? you buy a piece of land and it gives you access to thousands of acres.
tires look good?:)
Happy Birthday man! you can't take everything for granted.
Great video!
if i was going to go with a vandetta I think I would go with the 26x12-12 so I could fit it in my shed, I don't have much room for a wider tire.:)
This is really good information.