Search:

Is there a how to thread to change the driven spring to a red spring I'm doing mine tomorrow

OK guys I'm in dire need of the thrust washer group some are worn right through the previous owners did not know the word maintenance is I swear people don't give a care about equipment anymore

What can I use for the band adjustment tools since I don't have a set what thickness are they and what can I use I took apart my trans and you can see the grease marks on the bolts but I'm reusing my...

I have 177 hrs on my 2000 max iv I'm replacing the seals my bands should be too still I'm hoping

Richards relics sells them for $85.00 ea.

Mudd ox will not be making those kits I found out yesterday I too need the trans brackets that go on front and weld to the frame on my 2000

Well everyone has helped me out and you too has made me realize how much you can learn on your own by reading tons of posts so I did take another step tonight and removed the clutch off the Trans...

what is the 2008 max iv reinforcement kit I keep hearing of I already have the factory plated frame and the cross brace on the tube in my max what other braces to the Trans should I add

Thank you the trans seems to work fine it is just leaking out of the plungers there is a lot of sand built up around the sprocket drives like it's seeping from there it just needs a good cleaning for...

Thank you for all the info what is the best method of cleaning all the gunk off the trans to check it over

So I did a lot of research I'm thinking of rebuilding my self so I'm looking for resources for parts supply and everything you need for doing bands bearings sprockets and seals

Hi mike yea I was thinking about doing 1/8 in

Also what was the size of tubing was used and angle iron

Now is it important to lift the max off the ground

I like that a lot I'm thinking that's the route I will go and do a nice led light bar across the front and back

That's a good Idea to suspend from the lift buy I wonder how they did it

So I've been doing some research about doing a body band 2 x2 angle 3/16 thick and a roll cage or build the max iv roll cage with just the two partial body band's then tie it in to the frame behind...

Its a 2000 max iv

Does the body band help with flexing and will 1¹/⁴x1¹/⁴ angle iron work

Alpena I can ship ups I have a hub at where I work I hope the bolt hole is fixable from the movement in the frame