One of my wheels seems to be too pitted from rust to allow the bead to seal enough to hold air. If anyone has a spare wheel I'd love to buy it. It needs to take my 25x12x9 tires. Thank you.
Type: Posts; User: phabib
One of my wheels seems to be too pitted from rust to allow the bead to seal enough to hold air. If anyone has a spare wheel I'd love to buy it. It needs to take my 25x12x9 tires. Thank you.
Six years after buying this project my now 15 year old finished it with help from some friends from the motorsports club at his school. A couple of days ago we put it on the trailer and brought it...
I've never seen sealant used on exhaust gaskets. Just some never seize on the bolts.
I don't see why not.
You'll need to remove the belt first. That may require loosening the engine so you can slip the belt off. The bolt on the driven is regular right hand threaded. You remove it then slide the driven...
I used to have an old Triumph with a fuel tank that looked like the finest lace. I got some thick liquid from an advertiser in Hemming's Motor News that you'd pour into the tank and slosh it around...
If I were doing a project from scratch, I'd look at doing a hybrid drive with a a generator running one electric motor per side, and some batteries to provide the power that you'll only need for...
After spending way too much of my Sunday looking at tires online when I should have been doing taxes or paying bills, I'm probably going to stick with the 25x12-9 Rawhide IIIs that are on there now. ...
The thing runs. We got our slowest leaking 4 tires on it and drove it around a little. Now we need to adjust the transmission to make turning more responsive and we're good to go. Then take it all...
I had heard to only get 2 ply tires since the tire is the only suspension we've got. That kind of limits tire choices with so many 4 and 6 ply tires out there.
It seems the Rawhide III is kind of...
I own a decent gun and have access to an oven that will (barely) fit my frame so I would be doing it myself. I've been powdercoating all of the small parts as I've gone along.
I could use floor boards and an engine cover to finish my build. I wish I lived close enough to pick up.
I'm trying to decide if I want to go to the trouble of powder coating my frame or if some cold galvy and paint will suffice.
I couldn't say I've been working on this thing for that long, more like bursts of activity followed by long periods of storage. It probably took me 3 months to get it apart, then another few weeks...
Thanks. The only two things with that name I could find online were a British military thing and an industrial tracked vehicle. This doesn't look like either one of those. Is it some other...
It all became money well spent this past Saturday. My son had his friends over for another work session. One team worked on chain idler adjustment and other final things, one team assembled the new...
One more question, When I took the driven clutch apart and put it back together I had a choice of how much to wind up the spring to pre-load it. I went for the smallest amount, which to my thinking...
After years of sitting, I'm finishing the Max 4 refurb. Yesterday we started the engine for and got the axles spinning for the first time. This is on sawhorses with no wheels on it. The driven...
I'm about to make something for that very application. My m-20 came out of a Bobcat and I suspect I have whatever was in there.
Does anyone know what this is?
https://monterey.craigslist.org/snw/d/castroville-amphibious/6818026573.html