I have found that most of today's engines are extremely lean on the idle circuit , which also controls just off idle transition. if your engine has an adjustable low speed , richen it. if it has an...
Type: Posts; User: wildcard
I have found that most of today's engines are extremely lean on the idle circuit , which also controls just off idle transition. if your engine has an adjustable low speed , richen it. if it has an...
the highest cranking amp lawn tractor battery should do you unless you have a winch.
Hello All,
Well I have finally started rebuilding the 80s max 4 I have , have the frame out of the tub, rusted real bad . My plan is to blast the frame and scab the sides with some 1/8 flat stock, I...
msafi65 , I also have begun the process of rebuilding a early 80s max4 and would greatly appreciate the tracings for the frame reinforcements .
Thanks,
Scott
I'll second that . You can put in a needle and seat for a pumper setup . if it wasnt a new carb , thats where to start. then you can start jetting
can you use a bicycle brake lever ? or a motorcycle twist grip would be an option .
also you have to pull back on the sticks to back up push forward to steer , backing up is the opposite of going forward as far as the sticks are concerned.push forward to go forward, pull back to...
I believe I read in the manual every 50 hours.
there should be a good connection from the points to the - terminal on the coil. 12v + to + side of coil. you dont want to let the coil fire without a sparkplug connected to it and grounded, the coil...
Thanks Mike , Ya I had the trans out both plugs out , and turned it so the check hole was on the bottom, not even a drop . Thanks for the reline info , I'll search for that $150 beat $400 from R.i...
well after soaking for 2 days in pb blaster, I finally got the axle out of the sprocket tube, still have the outer bearing on the shaft but if nothing else my 4.5 with a cutoff wheel will take care...
Thank you !
I was wrestling to get the first axle out tonight, still stuck in the sprocket tube, the outer frame channel has rusted away in a couple of spots so I guess i'm going to have to figure...
I am wondering about the frame on my max 4 , I have heard that they can be weak under the trans. does anyone have suggestions and pictures of frame stiffeners or upgrades ??
any help would be...
here's a few pics to show what I'm working with. the seats and floorboards are already out.
wildcard
wildcard is online now Registered Rider wildcard is on a distinguished road
Join Date
Apr 2013
Posts
11
Well after getting home yesterday, my stepson and I started to...
Well after getting home yesterday, my stepson and I started to tear into the max , puller the old techumsi and engine mount , pulled the seats , cut off the 1 chain that was still on it , turns out...
Looks Like an awesome job WMS !!! cant wait to see a video of it in action !! do the polaris engines use rubber isolaters for mounts or did you have to fab up some engine mounts to bolt it to the...
Thats awesome ! I wish I knew how to tell how to post a video !
My search has begun for a wrecked polaris with a good engine to replace the techumsi 16 horse single thats dead in my Max !
I too...
Well hell !!! I've been thinking about a motorcycle engine, but the stumbling block has been converting to the cvt. the atv engine with a cvt setup already makes perfect sense !
interested to...
my vote would be a heli-coil insert. had to do a couple in my race bikes .......30 years ago........crap.getting old sux...anyway heli-coil then you have stainless steel threads for your plugs to...