Sorry guys, I'm going to have to back out of the trip. I need to stay in town with my family. Have a good trip and take some vids!
Type: Posts; User: lt250rdude
Sorry guys, I'm going to have to back out of the trip. I need to stay in town with my family. Have a good trip and take some vids!
I will be there with 6x6 and bringing a few buddies that will be peeling off to ride dirtbikes.
Matt
Awesome vid man! Nice job on the skid plate- looks great!
Could have a carb issue. Maybe a bad float needle. If the float needle is bad it wont regulate the flow properly which will dump an excessive amount of fuel into the cylinders causing a "hydro-lock"...
I have a max IV with the 1 1/4" solid axles with the bolt thats holds the sprocket hub. My axles were wore out where the hubs ride on the axle and the bolt holes were elongated-simple fix. I welded...
A harbor freight plastic welder and a black plastic bucket works nice too! The black plastic bucket is made from hdpe so it will fuse together good.
Could also be bad flanges that are bent a little bit making a gap between the two.
I would agree with Larry. I used tecumseh/peerless transaxles in racing mowers before. They are not very durable, broke many brand new ones within a few hours, more than one broke within 20-30mins. I...
Also could be a fuel shutoff solenoid on the bowl of the carb which has a wire that needs 12v + to it to open up (if equipped).
Well, you guys have alot of useful info and have answered all my questions for now! I think I will talk to QDS and make my decision after that. I just want my machine to perform very well without...
Ok, Thanks Jim. I'll be posting in the want ads soon for one. Also I read in another thread the 780 was only rated to 16hp, I have a 20hp vanguard, should I look for a different model primary? Does...
My driven is def wore out. I think i'll go with the same as what I got, just change springs. Thanks for the links. What do I have for options on primary springs and weights?
I'm wanting to upgrade both primary and driven clutches on my machine, 94 max IV 6x6. I think the primary is a salsbury 780. It has o ringed rollers. Not sure what the driven clutch is, cant find any...
Im about hour and a half away from there. Sounds like a really big place, but he is prob closed for hunting season.
I just got my max IV 6x6 going good. I never thought I could have so much fun! I work on atvs and dirtbikes for a living, raced quads, had sand drag quads, have sand quads 4x4s and dirtbikes, and...
Can anybody tell me the closest public places to ride around Kansas City. Two to three hours away would be alright distances to travel. So they banned aatvs at deepwater?
I think a bigger backing plate might work for a while until you put another big load on it. I have the factory roll cage so I am going to add a 1 3/4" pipe from each side of the roll cage and tie...
Ok thanks, think ill wait and buy exhaust instead.
Are they not useful for coming down steep grades? Ive only drove my max 20 ft before completely tearing it down, so i have no idea on how they do on other terrain.
Does anybody know which size brake bands i need for mid 90s max4? its a 4 inch drum but i'm thinking they used a larger band than that.