Search:

I do not have the ROPS on my Argo but I do have a custom rack I built. I built base with 2in. x 2in. x 3/16 angle iron and went completely around the machine. I used pcs of 1/4 x 1.5 in as large...

Very well done. I also travel with my 4 legged buddy and enjoy our land.

Thanks Sparx will try that in the morning.

Hi Fornaroq

I have had this rack on my machine since spring 2014. I fabricated it with 1 in. sq. tubing and 2in. square tubing to hitch. See pictures in my photo,s all racks and brackets are made...

Sparkx You nailed it. I saw in schematic idler shaft for front chains so I assumed they were idler chains. I put new front chains on my machine to 1/8 specs and within 6hrs use I had slack and...

I definitely have a HDI Avenger and I know what my 2005 avenger looked like and how to adjust it. I have yet to see pictures on the internet of how to adjust my 2013.
My drive chains are fine there...

Anybody know how to tighten idler chains on 2013 avenger HDI admiral tranny. I installed new ones and after some use they need to be tightened.

Hi Zircon,
I went to the local Total Battery Shop and purchased the largest Optima Gel battery that would fit in battery box. It depends on what kind of protection against a long walk you think is...

I use a homemade heavy duty Trailer Dog on my Trailer hitch and a ratchet strap through a shackle under my winch to two anchor points on trailer. 120klm return trip rough logging roads no movement...

Hey Redneck
Have a look at my profile you will see picts on hitch problem back rack chain saw bracket and wrap around tub angle iron.

Redneck you have received sound advice on your machine. The years of experience on Argo,s from our fellow members sure shows when you need a hand. I have had first hand experience with coil wires on...

Hi Plott Hound
I am running 18in. Argo rubber tracks on 2013 avenger. Last argo had 20in tracks unstoppable but took a lot of power to move over 400lbs of track.

Thanks Plott Hound your pictures say it all. Not hard to have 3 to 4 ft of snow in our area and I have yet to be stopped in it. I will admit to some minor detours on certain hills or packing the snow...

Amen Argo Jim on the EFI issue, our gas is terrible, corn should be in liquor not gas.
I have had a 2004 carb Avenger and now have a HDI 2013 and after using these machines 365 days a year I can...

Puzle
Good work.
Floorman,

silvbck,
I am impressed, you may have started something in snow country.
Floorman,

Thanks for the advice Deedeelin & Buggyman I generally have a backup battery. I run very little at night except for plowing and I watch my voltmeter. I guess I missed the boat when I did not order my...

Hi Everyone,
I just received a Cree Led Light bar for a birthday present. It is 120watts and I only have a magneto charging system on my 2013 avenger with Optima 1200amp gell battery.I seem to...

Hi Pike I agree with Rapid and Beagle you are asking for a bent bar or worse with the saw on the front.I run my HDI with a rack on the back,between the rack and the back of my machine I mounted my...

Hi Sard,
I put an Optima gelled battery in my 2013 hdi as soon as I bought it,I think it is a 1000 cranking amps but it is red.I went to the battery dealership and put the largest size of battery...