Search:

When it "runs out of fuel" when doing donuts in one direction only it is because the float is set too low. There is not enough fuel in the bowl. The main jet is near the bottom on the RH site of...

Hi,

Just wondering if this ride is still going to happen. been hearing rumors that is was cancelled due to lack of interest.

Thanks....

I would call RI. They can probably email you the instructions.

A newer style "internal exhaust" Max II with a Briggs is even quieter than a Max II with the Kohler (also an internal or inside the body, exhaust). I have the Kohler and my buddy has an 18 briggs. ...

There is a guy I know selling some Max IV's on Craigslist near the Max Factory. If you guys are looking to get some cheap shipping on a used vehicle....now is your chance.

Here are the links to...

A Briggs Vanguard engine should use 1.5qt. of 10w30 oil below 40 degrees F and straight 30 weight (SAE 30) for outside temps above 40 degrees F.

A T-20 (max trans) will take 1qt. of Type F...

Older Max's had black tanks. You can't see through them. If yours is this way, you should be able to order a Max IV fuel guage (cap/gauge). My buddy did this on his '92 max II. The Max II tank...

I was at RI today (about an hour drive for me) getting some parts for my Max II project and I spotted a blue Max II. They said it was the first production one. They were getting it ready for some...

On a 1993 Max II, all the chain is #50 standard roller chain except for the two chains running vertically from the jackshaft to the center axle. These are #60 standard roller chain. You may want to...

I was in lafayette, LA a few years back for work and a company I was working with had 7 Recreatives Buffalo trucks with dual wheels (26" tires) on them for use in the swamps....they were a survey...

Wow. That site is awesome! Answers any question I had. Plus, in the build a max section you can build a new one, or in my case, you can see how the accessories look on a vehicle. I need to get...

I think a Max IV can be converted to disk brakes. I know a guy in the club here who did it a few years back. If I remember right, as long as the Max IV has a square tube as the first crossmember...

I believe you have to leave the three nuts and cotter pins on the studs and press the whole dome piece off the splined shaft. A buddy of mine went through his. It was much different than my 780 in...

Tha factory uses UHMW plastic on their adjusters. I don't know what Richard's Relics uses.

How did I miss this post? Congradulations...that is awesome!!!! My daughter just turned one about two weeks ago. It changes your life, but in such a good way.

I have the old lever style Borg-Warner design in my Max II. Works great! It is amazing that a 37 year old t-20 still works perfect...I put new bands in two years ago along with a seal and gasket...

Those are Lombardini diesel engines. Kohler bought the Italian company about 6 months ago. They are not cheap.

I agree.....

You have to watch the belt compound. I am a snowmobiler as well as a 6-wheeler.....you can buy a cheap belt for either one, but when you have higher horsepower, you can expect to (and should) spend...

I have all kinds of brand new JLO parts I am trying to sell cheap. Listed in the classified section here. Let me know if you still want to fix that motor, I may have parts for you. I would like to...