Both sides of tranny are seized, motor is out, linkages are clean, fluid is full. Any reason why iboth sides could be seized at tranny?
Both sides of tranny are seized, motor is out, linkages are clean, fluid is full. Any reason why iboth sides could be seized at tranny?
Welcome to the site. What machine and type of transmission do you have?
Max 1v, not sure what tranny type?, 2001
You have a t20 trans and if the laterals are spring loaded and trans is in gear your not gonna be able to turn the sprockets.hopefully this is your issueOriginally Posted by Phiggins
Sorry I don't understand, please explain further
Ok there's a shifter for foward,neutral,and reverse. It needs to be in the neutral position for any gear to turn. the sticks or laterals are prolly spring loaded so when it's in foward gear and the engine is not running no gears on the trans will turn.as the bands will be pulled tight onto the drums inside the trans. hope this helps a little bit.
Posting Permissions
Reply With Quote