Thanks to member Jezzah, I now have a windshield on the way. Does anyone have a recommendation on something I can use for the side braces/supports? Any ideas appreciated.
Thanks to member Jezzah, I now have a windshield on the way. Does anyone have a recommendation on something I can use for the side braces/supports? Any ideas appreciated.
Not sure what you are looking for but I found Bimini top hardware on sale/ clearance at a local boat dealer , and made my own windshield here's a link to my gallery ...
Homemade Argo Windshield and Soft Top - Amphibious ATV Pictures
Good luck and be safe
bg
I'll check local boat dealer, Jezzah sold me a windshield with the hinge, but I am going to need something to use in place of the bars that hold the windshield in the upright position. OEM unit has bars that go from upper body to windshield frame and stow on upper body side when windshield is folded, I believe.
Go to a marine store and purchase what is needed to make the windshield mount like the current style, be sure NOT to drill the holes THROUGH the GLASS or you'll be buying that also.
If you wish to make it like the older style (which it is) if the loops are on the back and screw holes on are the front, a piece of cable goes on the front with bungee cords on the rear side.
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Advice is free, it's the application that costs.
No need to remove bungees to fold windshield.
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Advice is free, it's the application that costs.
Thanks so much Jim, I had no idea there were two methods, guess I'll see if windshield is new or old style and mount accordingly
I used thin wall conduit, also called EMT. Flattened the ends then drill flat areas so they can be bolted to frame and body. That seems to do well. Good luck.
Thank you
That windshield came off of an early 70's Max II but i can't say for sure if it was put on later or not. I hope it works out for you.
I'll make it work