New to my max ii,
Left side lever makes a "clicking" sound when I pull back.
Any ideas?
New to my max ii,
Left side lever makes a "clicking" sound when I pull back.
Any ideas?
It is probably the plungers in the T-20 popping back into their bores. a common thing on The newer T-20's and nothing to be too concerned with. A lot of times this can be felt in the sticks so that's where associate the sound with. just to be sure, remove the seat/ floor and watch the plungers on the transmission as you work the stick back and forth. you will probably see one or both of them not move for a split second as tenson is taken off it, then pop back in toward the trans. If that isn't it, let us know and we can dig into other possibilities
A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.
I'll "+1" that... The Hustler does that on the upper left plunger. I hate it, but I'm not about to revamp to the old style plunger linkage yet.
I believe I can "+1 that" also. Cut the second o-ring grooves in the plungers for the t-20 I rebuilt and installed in my Attex using(for now) the existing linkages. Not sure if it's the added "resistance" they offer or just the sloppiness of the u-channel type levers on the trans but the "clicking" is liking to make me crazy. Got a t-20 w/ "tounge depressor" type levers that shall soon be overhauled then installed in the Attex w/ nice spherical rod ends,precision shoulder screws,etc.,etc., to provide a nice "tight" feel in the sticks and attempt to quiet it down a little.
Joe.
IMG_1869.jpg
Thanks to Whipper, we have a mod to fix that annoying clickety clacking