Anyone have a source for the allen set screws used on the splined axles?

  1. Welcome to 6x6 World.

    You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
+ Reply to Thread
Results 1 to 4 of 4

Thread: Anyone have a source for the allen set screws used on the splined axles?

  1. #1

    Anyone have a source for the allen set screws used on the splined axles?

    They are a little different than set screws I have seen and I would like to replace them. I am guessing they are an off the shelf item from somewhere?

  2. #2
    Join Date
    Jun 2007
    Location
    Buffalo, NY area
    Posts
    2,968
    McMaster-Carr

    ...all the set screws you hope for.

  3. #3
    Join Date
    May 2010
    Location
    Fairbanks AK
    Posts
    1,456
    They are 5/16 x 18 dog point set screws. If by chance you have the early sprockets with 1/4 holes drill and tap them to 5/16". The 1/4" ones tend to break and let the sprockets wander.

  4. #4
    Thanks very much, I was fortunate to get them all out and would like to replace them since I am sure I stripped them a little at the end

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts