new mods on my max

[milkman5687]

Been spending a few late nights putting some new mods on my max2. The mud flaps work so well, they should be a factory option-keep mud out the tub and water out of the heat vents. The brush guard I salvaged off a buddy's side by side and fabricated it to fit the max. What you cant see is the Bluetooth speaker hidden in front of the fuel tank. It made the whole inside of the machine a speaker box, it really booms! I might add that my favorite would have to be the emergency screwdriver taped to the rack

[Eric1971]

Nice! I really like the mud flaps...

[tbone9]

I like what you did. The brush guard gives it attitude. Or shall I say maxitude. I enjoy seeing how others personalize their rides. Nice job!

[milkman5687]

Thanks fellas, ive been enjoying her alot

[tonyk72]

What BT speaker did you install?

[Andyman]

Looks ready for action

[milkman5687]

sorry for the wait, but to those who asked here is my Bluetooth speaker setup. Never feel the bracket with my size 12 feet and stays dry even in 'spirited' water entry...I used two exhaust hanger U bolts to connect the upper and lower sections of the bracket. 2" angle iron made a perfect cradle for the speaker (Photive- soundscape 8). Loosen one of the wingnuts on the side to drop the speaker to charge or wash machine.
The bracket bolts inside the tub in front of the fuel tank. Without removing it might be a bit hard to fully see the entire design. Removed the upper winch plate bolts, put the bracket into position and tightened them back up. You can also see in the last pic the phone mount I use to stream from. Works great

[djgeiman]

milkman I love the brush guard It looks like its saying "you pissed me off and now I am going to climb right over you" The mud flaps are great idea I may have to make a set for mine

[milkman5687]

The brush guard is nice and makes a nice push bar for saplings or nudging someone along but the mud flaps take the cake-they are my favorite...make some!! The rubber I used was a conveyer belt that had directional arrows, bought it from a local rubber company and cut it to fit with an angle grinder.