You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
So I'm putting my max back together finally and I was careful to take lots of pix during disassembly to help with reassembly. What I noticed yesterday was that I had clearance issues between the right lateral and the shifter. Specifically where the tab extends from the bottom of the horizonal tube of the shifter, where it connects to the shifter linkage, it is rubbing against the right lateral tube. I've looked at my pics over and over and it seems like I have reinstalled everything as it was previously, however now I have the issue with the shifter rubbing against the right lateral control tube. I'm sure that the two controls shouldn't be making contact. Anyone have any clear images of this area on their Max IV that they can share?
FYI, the machine was inoperable when I purchased it and I never checked to see if there was clearance or binding issues in this area prior to disassembly