You probably won't get all the trans fluid out. Some will remain. The total fluid amount is 32 ounces. See how much you get out. I use a bulb-type drain hose (simular to what outboard motor fuel tanks use) to suck out most of the fluid.
I use NAPA brand ATF type FA (28 ounces) and 4 ounces of Equa-Torque, also from NAPA. Mix both together to make one quart (32 oz.)
The T-20 has two square-head drain bolts (9/16" wrench). The top one is for filling, the lower one drains an overload of fluid. One quart will fill the trans, excess will drain out the lower hole. I use teflon tape on the threads before bolting them in.
I've read many times here that Buffalo Bearing will know what bearings you need. Flanges? I don't know.
Max6x6.com | Max Atv Parts | Mudd-Ox Atv is the factory Max parts site.
You will enjoy your machine. They are indeed a lot of fun.
Stand for the Flag. Kneel for the Cross.