My max iv does not steer in reverse. I assume it my need some adjustment to linkage? thanks for any input
My max iv does not steer in reverse. I assume it my need some adjustment to linkage? thanks for any input
Max IV
Dodge Ram 2500 4x4
swamp buggy powered by 1947 willys flathead
Pushing the sticks forward?
The drive in forward is the brakes in reverse & opposite.
My new beer holder spilled some on the trails - in it's hair and down it's throat.
Joe Camel never does that.
Advice is free, it's the application that costs.
Ditch the springs and try it again.
l like to buy stuff and no I don't do payments!
I had the same problem and one of my **** rods was slightly bent...took it off, heated it up and straigtin' it out...all good now.
Shift rods not **** rods
make sure the steering sticks have a enough clearance in the tub holes. And the shifter has enough clearance. Is it split shifted? Do not think this is your problem but worth checking, GOOD LUCK
Thanks for the reply's!
Max IV
Dodge Ram 2500 4x4
swamp buggy powered by 1947 willys flathead
Sounds like mine, insure that both sides of tranie are all the way engaged, if not one side will pop out n reverse making a horrible noise.
It looks like I didn't have both sticks in right position but seems to steer but very sensitive in reverse.
Max IV
Dodge Ram 2500 4x4
swamp buggy powered by 1947 willys flathead