You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
Hi, I figured I would start a thread on the reassembly and repair to my new to me Max IV. I just purchased this unit from another forum member and I can't call this a restoration as the Max is in overall excellent condition, it just requires a few minor repairs and some assembly that I will document here and look forward to your input and criticism.
My new to me Max IV
1st order of business is to repair the T20 mount holes that have started to oblong.
I decided to go with 1/4" plate as that is what I had on hand, I will install slightly longer mounting bolts as well.
plates cut, drilled and test fitted
a few bolts and nuts to keep everything aligned while I weld it up
All welded in and painted
dropped the T20 back in to make sure all is well, looks good.
On to chains, a tensioner, motor mounts tomorrow. If I keep this pace up I should be out for a test ride this weekend.
Last edited by Canadian_Zuk; 10-27-2015 at 04:19 PM.