You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
This is my first 6x6 and as usual it has turned out to be more work than expected. Are the bushing available to fix the problem seen below? Also it seems the bushing housing is flared out at the end so even a new bushing wont fit correctly. This damage also caused the jack shaft itself to bend. Thanks.
Get the correct bushing first then take it to a machine shop and have them true it up and put a sleeve in it then press in the bushing .or have them put a larger flange on the end and fit it for a bearing . Good luck
Reply With Quote
