Conversation Between Bazooo guy and teeko

Hi yes my brakes are manual like an old snowmobile with round pucks for pads.
The adjustment shouldnt change until the pads wear quite a bit.
When the pads get hot they dont work as good so make sure they dont stick on when you are not using them.
I have seen where the roll pins are replaced with bolts but i dont know how much better that is.
I am in the process of replacing the 2 rear axles on the Bazooo.My sprockets are keyed to the shaft.

Hey Guy, I took my argo to Waterdown two weeks ago for the first run. Lost one wheel in a mudhole and realized by the time I got back to the trailer I only had 2 wheel drive! I used crappy split pins from Princess Auto. I tried to upgrade to spiral roll pins which were on there originally. Anyway, I'm up to 5 wheel drive now but I have to weld one of the hubs because it tore a bit when the pin sheared. I'm quickly beginning to find out how much work these can be. Does your Bazoo have manual or hydraulic brakes? My manual brakes are a pain to keep in adjustment. Otherwise, it was pretty fun. I cant believe the stuff I went through, even with 2 wheel drive.

No time to work on the bazooo...still need to get an axle made.
Been busy getting ready for winter.

Hey Guy, should be finished 100% by next week. My secondary is up in New Lowell awaiting pickup, then I just have to put the top on. How is the bazoo? Did you get it all fixed up?

Hey Guy, I still have a few bugs to work out but we should definitely go riding/wheeling or whatever the correct term is. Thanks for all your help.