Welcome to 6x6 World.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!

anotheramature
Master Mudder

kghills - 03-07-2013 08:47 PM View Conversation

I was just looking it over this weekend. Everything looks pretty good with 30 hours on it. The main rail that runs the length of the body that the bars attatch to has a slight bow to it if you sight down the edge that has not really changed since I built it and all the welds seem to be holding up well. I keep thinking I maybe should have welded the stub to a plate that bolted to the rail rather than welding the stub for the support bar directly to the body rail but then there may have been too much preasure on the body by the washers that come from undernieth to attatch it unless I made a second bottom plate to spread the load. In any case it is working great and I simply love having the support bar. I will add suspension to the existing seat this spring and then I should be set.

Let me know if you have any more questions, Keith.

Showing Visitor Messages 1 to 1 of 1

About anotheramature