jpswift1
6x6 World Sponsor

JP....... if I remove the fuel solenoid and the carb gets constant fuel,....would it always be flooded ???

jp,.... I am having problems with my max IV (kawasaki 27hp).....
gas is not getting to the bowl after changing the elec. fuel pump and cleaning the carburetor,...I figure the electric solenoid that goes to the bowl should engage and pull back constantly to allow fuel to enter the bowl right ?.......or can I just eliminate the solenoid completely and put a short bolt in its place ?....so there is a constant flow of fuel to the bowl ?............please advise

yeah,,, thanks man,, it helped alot.... how's the lil truck doing and did you start going thru the hustler yet,,,,, a lil TLC goes a long way!

What's Jeff! How's everything going for ya up there? Question? Can i put 20hp intake and carb on my 16hp. what parts are compatible with the 16hp. Im trying to harvest some more horses out of the 16. I know that the 18 intake and carb will work, but what about the 20hp.

Hi Jeff . bob from waterford , do you know the part# for the double seal 1 inch axel bearings? i have this thing allapart , and i'm gathering parts to get it back together. i have the trany all apart, an the new parts heer for it. the G50b engine is all apart, not in too bad of condition. i,m still not sure on what eng. thanks k bob

Hey Man, I didnt check my mailbox until like 30 minutes ago. I got envelope you sent me. Thanks man. I finished with the front and rear bumper supports today, along with a little cage. I think that I will have to add some more stability to it, but hey,,,,, it's my first one building ever. Anyhow,,, thanks again for everything! See ya on thur or friday!!

Hey Jeff, do you have a set of K-locks, 12x12 with tires, if so what's your price? Just in case i need them for busco. Looks like all of my 12x12's are bent. I scored a set of 8'' from Cory with 21's on them,,,, really makes the Hustler look like it lost it's pimp juice, if you know what i mean! I saw that you are selling two titan 26x12x12 on ebay, which made me want to see what you had. My 18 opposed is a peice of junk,, so im putting my old 16hp in it, until i can get a 23hp. Do you think that it will be extremely under powered?

Hey dude, two things! One, I have cut both of my center axles to get the sprockets out to fix my chassis. I pressed the remaining axle out of one of the sprockets, but the right side sprocket (the three sprockets that are spaced almost evenly closed together) was a complete pain. A torch and a 30 ton press, and still the axle didn't move from the sprocket. I hope you have a spare for a good price?!?! Two, I have noticed on the late Max II, that regular spray can paint don't last long before it starts to chip. Do you know of any paint that would hold under the conditions.

hey dude, what's good with you? I got a Hustler question. Can I use the chassis of a 950 or so on and put in a 980 bigfoot tub. The only difference in the 980 and the rest of the Hustlers ( to exclude the early 70's models) is the tub and maybe a stiffer chassis, right? I also know that the transmission mounts for the hustler aren't as sturdy as we would desire, right? The only down fall or complaint I have with the Hustler is the smaller 1 3/16 axles compared to the Max 1 1/4 axles. I don't even know if all the Hustler's axles are solid or hollow? Yet and still, I feel the need to have one in my garage. My normal 6x6 conversations with my brother cbass now involves the letters H-U-S-T-L-E-R,,,,, see what i mean,,, I got the hustler bug, dude. I need some info, and I know you got it.
p.s. and it's all your fault,,, I got the Hustler bug because you let me ride yours,, thanks alot dude!!

Thanks bud u can email or text me anytime