I just rebuilt my t20 transmission … got in installed and did a test ride. Came back and started to clean my workbench and buried under a few tools was one pin sleeve (not installed) that rides on...
Type: Posts; User: max14hp
I just rebuilt my t20 transmission … got in installed and did a test ride. Came back and started to clean my workbench and buried under a few tools was one pin sleeve (not installed) that rides on...
I made my own and very well worth it
Thanks... I am aware there are right and left transmission bands used for each half...I am good there. Just need to know what end of the transmission band is used for the O-ring plunger and other...
I am rebuilding my T20 transmission and removed the O-ring plunger ends from each one of the 4 transmission bands that I had relined. I now have them back and not sure if the plunger needs to be...
Can anyone tell me how to tell what diamond shifter goes on left and right? I was doing some maintenance and took both side off. Now I cant remember which diamond shifter goes to what side. Does the...
Was thinking a new fuel pump? prob still has the original stock one on it ---- electric pump something to think about?
I have a 1996 briggs vanguard v-twin 14hp on a max ii and when i have on the ice attempting a 360 spin - it always tends to bog down or occassionally stalls. Has new carb .. But even old carb did the...
Still trying to work the last bug out of my recently restored 96 maxII. I have a slight drift to right and yes I did check psi and tire circumference multiple times as well as running less psi on...
I tried putting less air/smaller diameter on left...but same results
Hello,
I have a 96 Max recently restored and finding it likes to drift off to the right slightly which I always have to correct bumping the left lateral about every 60ft. Has all new...
yes both sticks are aligned very well. and movement is equal in travel. The way it is now...every 100-150 ft or so I have to do a quick tap back once on the left stick to compensate/correct the...
I have a 96 maxii with the older hollow axles.... Except the front right axle was previous replaced with the much heavier solid one. I have restored the entire machine and gotten a few rides in and...
Just finishing up my 96 MAXII restoration and went for my first test drive. I have new chains - new bearings and tires all at 3.5in psi. I noticed a slight pull to the right when both sticks are...
I am puttting back together my 96 maxii and i need to know where the 2nd ground stap goes....i have the one from the battery to the frame....where does the 2nd one hookup too? Engine mount to ?...
I have a few questions of what I can do for a performance upgrade. What I have is a stock 1996 B&S 14hp Vanguard OHV V-twin engine and of course I like to increase the top end speed over the 3600...