Search:

I was skidding logs off the moubtain when i heard a pop sound and then started feeling a lot of vibration coming from the machine. After a visual inspection I found a broken cam on the secondary...

Yup, thanks Rodp, looks like I am missing parts 16-19 or 20&21.
Now to find a source for them.
http://www.6x6world.com/gallery/data/1237/thumbs/M18_governor_parts_list.png

Can someone provide me with some info on this Governor linkage setup? I think I am missing some pieces. See picture.

http://www.6x6world.com/gallery/data/1237/thumbs/M18_Govenor_Linkage_Pic.jpg...

Hi Jim,

Bunch of questions for you; Did you grind the weld on both sides of the wheel flange? Did you mark the flange and axle so that it was indexed the same when welding back on? Any special...

Hi Noel,

I would love to do an upgrade on this unit. However, the funds are not available right now. If I can get it running reliably for a while then I might be able to justify, to the wife,...

Saw this thread:
http://www.6x6world.com/forums/argo-atvs/7857-back-working-argo.html

Suggestion was to pop the pins out and then drive the machine to loosen the sprockets. I believe I will try...

The pins are finally coming out!! :D

Beating them with a drift pin, grinding them off flush the sprocket, then driving them the rest of the way through worked.
...

thanks for the ebay information on chains. I will keep an eye on those auctions.

I am still struggling to get the roll pins out of the #3 axle. I have ground them down flush with the sprockets...

I believe someone replaced the fuel cap and filler tube on my 80's 8x8 I/C. The fuel cap does not screw on but more or less pushes on. When the argo is on a side hill with the fuel cap on the down...

New bearings have been orderd through a supplier we have at work, 9 bucks each, we'll see how good they are when they show up. HC206-20 is the part number I used, 1 1/4" ID, 62mm OD with eccentric...

I got the #2 Axle out finally. It took an 18" allen wrench and some leverage but the setscrew finally popped loose. I was then able to use a 2x4 to brace the hub in between the lugs to keep the...

I started to pull the two messed up axles out. The #3 axle with the trashed bearing, I have the setscrews on the bearings removed but can't get the pins out of the sprockets. I tried drilling them...

Thought I'd post a closing comment to this thread.

Thanks to everyone for the input. I did a lot of google searches, watched a bunch of youtube and decided an 8x8 was the way to go. By chance a...

I found the outer flanges and bearings at BuyArgo.com is America's Argo ATV Super Store - Grand Junction, Colorado
They have a replacement axle for the pinned 1 1/4" (p/n 605-72) listed as 810-113....

While looking over my new (to me) argo I noticed some little metal balls sitting in the bottom of the tub. I recognized these as ball bearings and assumed, being that the argo is 30+ years old, that...

gimmegreens,

Thanks for the reply! I've been searching the gallery. Its pretty awesome to see what people can build and from some of the videos the exhausts sound pretty good.

I was hoping to...

I just bought a mid 80's argo 8x8 and need to do some work on it.

The muffler is rusted, has a small hole in it and is really LOUD. I don't think there is enough good metal to weld it and am...

Don,

Thanks for the invite! Please keep me in mind when you head to Harrisonburg. If I can get away from work I will make the trip up.


Thankg again.
Tom

Hi, I am in the beginning stages of deciding what to buy for our family, aatv or utv. I have never seen an aatv in person and was wondering if there were any members in the Blacksburg/New River...

Hi, I posted an intro in the new member thread with a little background and now for my first question in what will surely be thousands...

I have been looking at UTV's like the new Kioti 2200...