Search:

Max 2 with 18hp briggs and stratton. Lacks power and sprinkles little gas out of the air filter. When I take the airfilter off and ride it to test I can see it sprinkling gas out the choke intake...

When I pull the knob out the choke butterfly is open. Seems like the little tab that holds the cable to the motor needs to be on the other side to pull the choke butterfly closed when the knob it...

I would not be opposed to that. I'm looking for the biggest engine I can out in without having to modify everything.

UPDATE: my electrical problem was a blown #2 fuse and a missing fuse that was added to the harness. Once those were replaced everything worked again.
I think my choke problem is bad choke cable...

Gotcha. Seems like it has been messed with. My wiring harness isn't like the one I'm seeing in the manual. At least I found my problem. Thanks.

Hey bud. Can you do me a favor and check what the 2 other fuses are that are next to the 2amp? I know there's a blue 15 and I need to know the 3rd one. My max is missing it. Thanks!

Is that the same for a maxii with a 18hp vanguard? I'm not seeing the 15amp fuse or the one I'm missing

So I found my problem. One of the fuses was missing. Not the 2 amp or the 15 amp but the other one. My only problem is I don't know what size amp the 3rd one should be. I put a 5 amp in and all the...

I have 3 fuse locations under the left side plastic near the front headlight. 1 is a 2amp fuse and the second one is a 15amp fuse. What is the 3rd one suppose to be?

Where would be a good place to pick up one of these manuals

This is the exact engine I was looking at. https://www.ebay.com/c/28018456692
I wanted to make sure it was the same as the 18hp other then displacement. Is the shaft height/length the same? Is this...

If I buy a brand new 23hp vanguard engine will I be able to use it in the max? Is this a direct bolt on....

Found a blown fuse under the front dash. It's a #2 and not common in any auto parts store around here. Will have to check tomorrow and see if I can find it. Thanks a lot.

Where are the fuses located?

Help please!! I have a 2006 max ii and it will not start via key. When I turn the key it doesn't even make a sound. I took the battery to get it tested and it works fine. However I can start it with...

The levers were touching the seat when turning so I adjusted the bolts at the channels to move the levers forward away from the seat. Also I switched the regular links with the ez shift links. Yes...

Well I have about 2" deflection. Also now the maxiv moves in gear like the throttle is engaged. As soon as I put it in forward it jumps and starts rolling. The only thing I adjusted was the u...

16832168331683416835

Here's my clutches and governor. Does the throttle assembly look right?

Hello everyone, my name is Roger and I am the proud owner of a (new to me) max iv. I got it on a trade and now like every first-time max owner, I have a ton of questions. Not sure of the year but I...