Search:

$500? Wow, good job! PICS!

I would check bearing grease or mud in one or something like that. Much like a worn axle bearing on a car, you'll get more friction, some drag, and a wander.

Just ANOTHER thought.

In my pea...

Ah, that's where it starts; The "While-I'm-At-Its".
"I'll just do this one small thing. Well, while I'm at it, I might as well do this other thing too. Well, It'd be silly to do all that and not...

https://www.youtube.com/watch?v=l2BElVFCFn0

<iframe width="560" height="315" src="https://www.youtube.com/embed/l2BElVFCFn0" frameborder="0" allow="accelerometer; autoplay; encrypted-media;...

FINALLY found some time to get the sprockets over to my fabricator friend to weld up. He did one and I did the other. I also took the opportunity with both center axle sprockets out to weld in some...

So my fabricator friend wasn't able to inexpensively source a piece of steel to cut a sprocket with his cool laser. He said it was some weird uncommon thickness. Richards Relics didn't have any...

I've gone through all those things too! I ordered a few boxes of that Tsubaki chain off Amazon with issues only with the links. Tractor Supply, if you have one locally, also has chain and links and...

I have this Mr. Gasket electric pump fueling a 22hp Predator. It works great. The only issue I had was making sure the pump was below the fuel tank, as it is just a PUSH pump and not a PULL-PUSH...

Center right side sprocket assembly out of a Hustler. 35, 26, 26 tooth count.
Please let me know if you have one!

http://www.6x6world.com/gallery/data/642/medium/PHOTO_20181121_164310.jpg

And the trans just slips in? It doesn't actually bolt to the trans? Innnterestingggg...

https://media3.giphy.com/media/oxYnuGq7fnwUYyayXl/giphy.gif?cid=3640f6095bfa9d5e444d733451e242e3

Well that's pretty cool in itself, though! Thanks.

Step one of the repair:

Epoxied-in grade 8 studs. I forgot that I had already drilled and tapped these from 3/8" to 7/16". ...

The Suburban Hustler has always had transmission issues, even after an $800 rebuild. It would either shift into reverse great but not go back into drive, or the other way around, on either the left...

Yes, the big one is 35 teeth. I think Richard may have what I need in a pile of parts, but I won't know for sure until after Thanksgiving (and he isn't cheap). If I can find a whole assembly I'll...

Anyone parting one out? I need a center sprocket assembly. I don't know which happened first, but I had that sprocket, the trans-axle chain, and the idler sprocket all get tangled up in the frame...

Where do the keyed axles come from? The one that was on my Hustler when I got it is the only axle of my 6 that I've not had a problem with. Are they a factory part?

Is is possible to have my...

I have a Hustler that I continue to have axle and sprocket problems with. It seems the V-Twin is too much for the old sprockets with the wallowed-out holes. It was suggested that I switch to keyed...

Price lowered!

Now, granted, I have a 22hp engine replacing what was 14 or so, but considering plowing: I have attempted to pull things (like phone poles and a stuck zero turn mower) with my Hustler 6x6 a few...

https://atlanta.craigslist.org/nat/snw/d/hustler-6x6-must-sell/6713442287.html

Turns out I need a roof and siding. Hustler's gotta GO. Make me an offer!