Has anyone tried this lately? Does anyone have any more pictures or parts list they can provide? do you have to pull the motor to get to the idler bearings? TIA.
Type: Posts; User: Clarkracin53
Has anyone tried this lately? Does anyone have any more pictures or parts list they can provide? do you have to pull the motor to get to the idler bearings? TIA.
Who's ready to do it again this year???
I'm looking to install the new style drain plugs on my response so I don't have to keep lifting the back floor pan out to drain water. I was wondering if anyone has done this before if you could send...
I have an argo 8x8 and the passenger 3rd outside bearing won't take any grease on the top zerk. The lower one takes it but when I put the grease in the the top it squirting out the bottom cork seal....
Has anyone drilled a hole through their wheel to create an access to grease the zerk instead of having to drop the tracks every time? is this possible? What size of bit would you use? any information...
any ideas on how to make the brackets? I'm not much of a fabricator. Thanks for the stub shaft information. would i have to pull the motor to install that stub shaft? there is a screen cover on there...
What do you think about addin a second battery? if both drained would the 16amp charging system charge it back up?
I swapped the motor out of my argo response and bought the wrong motor. it came with a 16amp charging system. when i run the winch it drains the battery quickly. i was wondering if anyone has some...
Looking to do this on a 23 HP vanguard as well. any links and pictures would help out alot
would these fit on an argo response? they look about the same set up. did you cut the bottom the the light housing to fit the mounting hardware through?
do you still haveyour tires and rims for sale?
Any ideas on what battery to put in then? Standard or Deep cycle. how many cranking AMPs? Does anyone know the demensions of the battery or one from Oriely or Autozone? Thanks for the response...
But would that cause the over tightness of the chains on the right side? Is there a chain adjuster? Can the tracks be to tight? I have play in the middle of the tracks. and both tracks are the same....
Having problems with the charging system. I replaced the stock battery with a blue optium battery. It seems like when I run the winch it kills the battery but it never charges back up. I put a volt...
hey everyone I recently put Adair tracks on and they are amazing. The only problem is the Argo pulls to three right pretty bad. I looked at my chains and the right side is very tight. My left side...
Hey everyone just joined. Bought a 1996 argo response from Tim with adair argo sales. From wichita ks looking forward to learning as much as possible thanks for having me