Search:

hey guys i have a chance to get a 1LT diesel kobota engine do you think this would be a good engine to put in a 1988 8x8? do you think it will fit? how would i mount the clutch to the shaft?

can anyone tell me where i can find a belt for my 1988 argo 8x8 the argo parts manual says it is 52" oc the belt says argo 002 on it is there a after market belt i can get for it

well after putting the new motor in works great i blew the belt (it was in poor shape to start with) were would i be able to find one and what size should i get the original belt had argo 002...

yes it is idling as low as it will go it is a 18 hp briggs i'm not sure how to shim the clutch if some one could explain that that would be great i think the belt is just touching the side...

well i put a new motor in my 1988 i thought i got the new motor in the right spot but i must have screwed up when i start the engine the primary clutch engages just a little bit but enough to...

i have a 18 hp briggs thats going in my 8x8. the motor had a gravity feed fuel system i want to switch it to a fuel pump how do i hook this up there is a fuel in a fuel out and another port which...

has anyone on here tried the escargot tracks on an older machine i have 88 8 wheel and want to try tracks second question is they dont look that hard to build has anyone buil tracks similer to...

i could go bigger i just don't want to do a lot of modifications would 27 hp fit in or would i need to do some cutting and fitting

yeah i was just wondering so i can buy a motor for it that would fit it had a 18 hp kohler in it i was thinking of a 18 hp briggs

hi i have a 1988 8x8 needs a new motor i would like to no what size saft motor i need i know its a 1' shaft but what lenght would i need i dont want to run all the way out to the farm just to...

hi guy's I have 88 8x8 and going to do a motor swap it has a 18 p kohler in it now but it has issues with over heating so i can get a very good deal on a 25 hp kohler it has a 1 1/8 shaft and...

doe,s any one know how much torque would be on the end of the crankshaft where the clutch is. im trying to build a stub shaft and trying to figure out if the strength is there

i want to put in a new motor in my 88 8x8 i have a 18hp briggs the end of the crank has 3/4" pipe thread on it I was wondering if i can make a stub shaft for it and screw it on then backweld it so...

hey guys just a quick question how much torque would there be on the end of the engine shaft I have a 18 hp briggs to put in my 88 magnum and the motor has a 1'' shaft that is goes down to 3/4''...

hey I have a 88 argo 8x8 and going to change the motor i have a 27 hp koholr and want to put it in is this motor too big will it damage the tranny and second has any one ever bored out the clutch ...

hey guys i have a 1988 argo magnum 8x8 with a 18hp kohler .there is nothing wrong with the engine it just does not cool the engine shrouds where damaged and removed. so i got a hell of a deal on...

well i have a 18 hp kohler in a 1988 8x8 and it wont charge i checked the stator and its good its putting out 38v ac i took the regulator out and got it checked and it checks out good but when i put...

hi i have a 1988 argo 8x8 it has a 18hp kohler in it and i am wondering what the biggest motor i can get in it without cutting the body at all i can get a 18hp briggs for almost nothing would this be...

i have a 1988 argo 8x8 and am looking for some tracks where can i find some used or new

i have a 88 argo magnum with 18 hp kohler and it wont charge i have changed the rectifier and thats not it so im thinking it is the stator my question is should i take it apart and see what the...