You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us. Looking forward to seeing you in the forums and talking about AATVs!
Alan, where in Illinois are you located? I'm in Rochelle. Have a bunch of stuff left over from my 980 rebuilt/repower. Including the stock shifter and control rod.
While researching engines for a repower I found after 23hp most manufactures go to a larger block and output shaft. The larger driven clutches needed can lead to clearance problems with the body while trying to maintain proper center line with the trans driven pulley. Not saying it can't be done but something to think about. As far as power, my 23hp will easily flip the 980 over backwards on a steep enough hill. And that's stock. Hotter cam, valve springs and some jetting it would be down right scary.
6x6 Parts has those weld on repair washers for the sprockets along with just about everything else. Measure your axles and then search "insert bearings" You'll find what you need.
I live on a farm outside Elmwood. Looks like I'm about 2 hours from you. I'd be interested to know what you had to sell. I think I'm going to make my own shifter linkages so that I can shift each side independently.
Reply With Quote