Search:

Hey man I have one or two & you can have them, they are the old 3 bolt hubs. I'm in West Monroe La. Give me a call or shoot me a text, 318-331-0324

Alright so we uncrated the 18hp briggs which was bolted to an engine plate out of another hustler. When we removed the engine from the plate we noticed that the plate would not fit my 950. The 950...

I have 10 " polaris rims with 24" gators for my 950. Recstuff has a 10" x 6", 5 on 4.5" wheel very reasonably priced. If i had this to do over i would consider them as the gators are very flat when...

I think that JP is right, seems like Howard Griffin had them for around 3200 in the early 80's.

Hey man , the 16 hp kohler is plenty of power & you can still get parts for it. Where are you located ?

If memory serves me correctly the hustler axles were made out of 1144 stress proof. The 1 1/4" is not that expensive around here in either 1144 or 4140. You could have your sprocket tubes reamed and...

Yep, i got all of the sprockets for my hustler 950 there. They have some real good prices on sprockets with hubs if you are considering going with keyed axles.

I've got polaris 10" wheels for my hustler 950, had to get some hubs built but if i had it to do over would probably use the 10x6 wheels from rec stuff. 5 on 4.5 ,could use on the stock axles....

Is there a big enough market? Are you kidding me? The market for hunting & hunting accessories is tremendous. I met Phil back around 1992 when he was winding up his commercial fishing and just...

The hydratrek was at their warehouse a while back. I didn't think to ask Godwin about it.

Man i just removed a set of sprockets and axles from an ole hustler 950 & it was bad. PB Blaster would not phase the rust holding the sprocket tubes, had to cut the left center axle out, then bent...

What kind of scope do you have on the S&W 500 ? I think you are not going to come out on the good end of the swap for a sunken in need of repair max two stroke.

I take it you must have watched the bananna splits when you were just a wee lad. Looks like an attex.

Alright hustler guru's, i have to make a decision in the next week or two about which frame to send to the powder coater. One of them has the factory split shift and one of them has the factory easy...

I went with 1 1/4" i.d. seamless tubing, it appears to have about the same wall thickness as the stock ones. Had one end of the 4140 turned down to 1" to use the stock inner bearings & got 1 1/4"...

I bought a 12 foot peice of 4140, 1 1/4" at a place called Sol's Pipe and steel in Monroe La. two weeks ago for 82 bucks and change. Thought about boring my old sprocket tube assemblies to 1 1/4" but...

I took off work this week to work on my hustlers, should've checked the weather, the 96 - 100 degree heat was ok the first two days but hell i aint 25 no more. The last two days have been spent...

Hey guys if stihl made a boat motor i would be the first in line to purchase one, & for the record i would drive a dodge before i could ever consider a ford. GMC is the standard of trucks where i'm...

Hey man everybody knows a ford is a rebuilt dodge! ha ha. Seriously i road in a pick up that had a hemi & the best way to describe it was " it never stops accelerating". Danged ole man deadgum aint...

Yep, red spring for the t-20, type f fluid and any and all engine mods.